Leica FlexLine TS02 User Manual page 86

Functions
Access
CHECK TIE
Messages
Next step
1. Press FNC when within any application.
2. Select Check Tie from the FUNCTIONS menu.
Field Description
Bearing Difference in bearing between the two points.
Grade Difference in gradient between the two points.
Difference in horizontal distance between the two points.
Difference in slope distance between the two points.
Δ
Difference in height between the two points.
The following are important messages or warnings that may appear.
Messages
Less than two valid
measurements!
Press OK to return to the application where FNC was selected.
Description
The values cannot be calculated as there are less than
two valid measurements.
FlexLine, 86