Leica FlexLine TS02 User Manual page 55

Setting
Field Description
Not Allowed
Auto-Off Enable
Disable
V After DIST Sets if the vertical angle value recorded is the value that is displayed
when DIST or when REC is pressed. The vertical angle field in a
measurement screen always shows the running angle, regardless of
this setting.
Hold
Running

Does not allow multiple points with the same point
ID.
The instrument switches off after 20 minutes
without any activity , for example no key pressed or
vertical and horizontal angle deviation is
Automatic switch-off is deactivated.

Battery discharges quicker.
The vertical angle value that is recorded is the value
that was in the vertical angle field at the time DIST
was pressed.
The vertical angle value that is recorded is the value
in the vertical angle field at the time REC is pressed.
This setting is not applicable for the application Tie
Distance or the functions Hidden Point and Height
Transfer. For these, the vertical angle is always
running and the value recorded is the value when
REC is pressed.
±3".
FlexLine, 55