Leica FlexLine TS02 User Manual page 90

Coding
CODING
Extend / edit codes
Field Description
Find/New Code name.
After entry, the firmware searches for a matching code name, and
displays these in the code field. If a matching code name doesn't exist
this value becomes the new code name.
Code List of existing code names.
Desc. Additional remarks.
Info1 to More information lines, freely editable. Used to describe attributes of
Info8 the code.
Q-CODE Two digit quick code assigned to the code. Refer to "7.2 Quick Coding".
To each code a description and a maximum of 8 attributes with up to 16 characters
each can be assigned. Existing code attributes, displayed in fields Info 1: to Info 8:,
can be overwritten freely with the following exceptions:
RECORD
To record the code without measure-
ment.
AddList
To add the entered code to the
codelist.
FlexLine, 90