Leica FlexLine TS02 User Manual page 179

Vertical geometry
elements
Applications
For onboard input Roadworks 3D supports the following elements for vertical
alignments.
Element Description
Straight A straight has to be defined by:
• Start chainage and start height of P1.
• End chainage and end height of P2, or length (L) and slope (%).
+%
P1
TSOX_113
Transition A circular curve has to be defined by:
curve • Start chainage and start height of P1.
• End chainage and end height of P2.
• Radius (R).
• Type: Convex (crest) or Concave (sag).
a
P1
R
P2 P1
L
-%
L
b
R R
P2
P1
R
P1 Start point
P2 End point
L Length
P2 % Slope
a Convex
b Concave
P1 Start point
P2
P2 End point
R Radius
FlexLine, 179