Leica FlexLine TS02 User Manual page 244

Check & Adjust
Messages
4.
180°
180°

TSOX_065
For checking the aim, the difference in Hz and V are displayed.
5. Press REC to measure to the target point.

The old and new calculated values are displayed.
6. Either:
• Press MORE to measure another set to the same target point. The final
adjustment values will be the calculated average from all the measurements.
• Press OK to save the new adjustment data, or
• Press ESC to exit without saving the new adjustment data.
The same messages or warning as in "11.3 Adjusting Line-of-Sight and Vertical Index
Error" may appear.
Change face and aim at the target point
again
FlexLine, 244