Konica Minolta bizhub C650 Service Manual page 90

Field Service Ver. 8.0 Jun. 2008
[1] [2]
[3]
[2] [3]
[1]
[1]
[3]
13. To reinstall, reverse the order of removal.
14. Remove the tray 2 separation roller assy.
See P.38
15. Select [Service Mode] → [Counter] → [Life] and clear the count of [2nd.].
See P.504
[1]
A00JF2C022DA
A00JF2C012DA
[2] [4]
A00JF2C013DA
3. Periodical check
10. Remove two C-clips [1] and two
bearings [2], and remove the feed
roller/pick-up roller assy [3].
11. Remove two C-rings [1] and bearing
[2], and remove the tray 2 feed roller
[3].
12. Remove C-clip [1], C-ring [2] and
bearing [3], and remove the tray 2
pick-up roller [4].
37