Konica Minolta bizhub C650 Service Manual page 111

3. Periodical check
[2]
[1]
[2]
11. Select [Service Mode] → [Imaging Process Adjustment] → [Gradation Adjust] and
carry out gradation adjust.
See P.461
58
[1]
A00JF2C609DA
[2]
[1]
A00JF2C608DA
Field Service Ver. 8.0 Jun. 2008
NOTE
• When removing/reinstalling the
transfer belt unit, be sure not to
allow the contact [1] to hit the screw
[2] of the transfer belt unit lock.
10. To reinstall, reverse the order of
removal.
NOTE
• Insert the transfer belt unit with
care not to allow its docking gear to
be damaged by hitting it against the
rail or associated part.
• Before reinstalling the transfer belt
unit, make sure that the two trans-
fer belt unit locks [1] are completely
unlocked. Insert the transfer belt
unit by pressing the area [2] (two
places) shown in the illustration on
the left until the transfer belt unit is
fitted into its place.