Cms Corresponding Parts; Cms Corresponding Parts List; Replacing Cms Corresponding Parts As A Set - Konica Minolta bizhub C650 Service Manual

Field Service Ver. 8.0 Jun. 2008
3.2

CMS corresponding parts

3.2.1 CMS corresponding parts
• "CMS" stands for "customer maintenance support," and this is applicable when the user
wants to change parts by himself.
3.2.2

CMS corresponding parts list

No Section
1
Processing
2
section
3
Image transfer
4
section
5 Transport section Transfer roller unit
6 Fusing section
3.2.3

Replacing CMS corresponding parts as a set

• There are six types of parts correspond to CMS, but parts should be replaced as a set of
two parts listed below (3 patterns) for conducting CMS.
Pattern 1: Imaging unit K + Color toner filter
Pattern 2: Fusing unit + Ozone filter
Pattern 3: Transfer belt unit + Transfer roller unit
* Below are the reasons for replacing CMS corresponding parts as a set.
• CMS corresponding parts are prepared as a kit according to the patterns listed above.
• Life counter cannot be reset by the user even if the color toner filter, the ozone filter, or
the transfer roller unit is changed by itself.
Corresponding parts
Imaging unit K
Color toner filter
Ozone filter
Transfer belt unit
Fusing unit
Cycle Clean Replace
300,000
150,000
300,000
450,000
450,000
300,000
3. Periodical check
Ref. page
●
P.49
●
P.53
●
P.52
●
P.55
●
P.59
●
P.60
21