Replacing The Fusing Unit - Konica Minolta bizhub C650 Service Manual

3. Periodical check
3.5.24

Replacing the fusing unit

• The temperature gets high in the vicinity of the fusing unit. You may get
burned when you come into contact with the area. Before replacement
operations, make sure that more than 20 minutes have elapsed since the
main and sub power switches were turned off.
A. Periodically replaced parts/cycle
• Fusing unit: Every 300,000 prints
B. Procedure
1. Open the upper right door.
[1]
60
CAUTION
[1]
A00JF2C057DA
[1]
A00JF2C058DA
Field Service Ver. 8.0 Jun. 2008
2. Loosen two screws [1] of the fusing
unit.
3. Hold the position as shown in the left
and remove the fusing unit [1].
NOTE
• When removing the fusing unit, grip
it with both hands to avoid letting
the fusing unit fall down.