Table of Contents
Advertisement
Display C – IP: (third step)
Ethernet Printer Troubleshooting Procedures
Troubleshooting procedures
If you are having trouble connecting to your Ethernet Printer or printing to it, you should go
through each of the following procedures.
Step
Procedure
1
Follow the Verifying the Printer Connection procedure (below).
2
Verify that you are choosing the correct Printer Driver. (Note: The Driver
must match the model of the Printer.)
3
Verify that the port configuration of the PC Printer Driver is set to
communicate to the Printer over the correct IP address.
See Frequently-asked Questions at the end of this section.
HDPii High Definition Card Printer/Encoder User Guide
Display D – IP: Address (fourth step)
L001130 Rev 1.4
151
Advertisement
Table of Contents
Troubleshooting
