HID HDPii User Manual page 106

Telnet Command
lpq
Printer
Printer sm
set sysinfo contact
location
label
from
syslog name
type
dest
email
udp
from
HDPii High Definition Card Printer/Encoder User Guide
Command Purpose
Display information about
print jobs and their settings.
Display information about
the Printer (i.e., model
number, Firmware version
and serial number).
Display information about
the secure mark settings of
the Printer.
Set the contact string.
Set the location string.
Set the label string.
Set all strings from default or
current settings.
Change the name of a
system log path
Change the type of a system
log path. This starts or stops
logging on start of jobs or on
faults.
Change the destination of a
system log path. This may
be set to none, e-mail, udp
or tcp.
Change the e-mail address
for e-mail notification for a
system log path. It must
specify a valid e-mail
address.
Specify the IP address of the
UPD system logging
program.
Restore system log path
L001130 Rev 1.4
Command Format
list lpq
list printer
list printer sm
set sysinfo contact
[<STRING>]
set sysinfo location
[<STRING>]
set sysinfo label
[<STRING>]
set sysinfo from
default|current
set syslog <LOG_NAME>
name <NEW_NAME>
set syslog <LOG_NAME>
type [[-]job] [[-]pfault]
set syslog <LOG_NAME>
dest none|email|udp|tcp
set syslog <LOG_NAME>
email <EMAIL>
set syslog <LOG_NAME>
udp <IPADDRESS>
set syslog from
106