HID HDPii User Manual page 160

•
Card Type Selection: Before printing, if using these standard Fargo card types, check
to make sure that the appropriate card type option selected from the Card tab of the HDP
Printer Driver:
•
Proper Settings: It is very important to note that not all card types will be
accommodated by these default settings. In some cases, experimentation may be
needed to find the proper settings.
For the cases where custom settings are required, the Printer Driver's Card Type option also
includes Custom 1 and Custom 2 options.
•
Settings: These settings allow designating a unique Card Type name, which then saves
custom Image Transfer settings.
•
Custom 1: For example, Custom 1 could be changed to read as My Cards. Custom
transfer settings would then be available whenever this Card Type option is selected and
would be saved each time the Printer Driver setup window is closed.
•
Custom Card stock: To determine the proper settings for custom card stock, Fargo
recommends the Tape Adhesion Test.
HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
160