HID HDPii User Manual page 88

not a valid password.
Print Film Out The Print Film installed in
the Printer is empty.
Print Film is not No Print Film is installed in
Installed the Printer.
Print Film Sensor The Printer cannot find
Error the next panel on the Print
Film.
Wrong Print Film An incorrect Print Film has
Installed been installed, or a driver
setting is incorrect.
Invalid Print Film The Print Film installed
Installed does not match the
SecureMark configuration
of the Printer.
Print Film Error The Print Film caused a
general error.
HDPii High Definition Card Printer/Encoder User Guide
password.
To cancel, press the Cancel Print
button.
Install new Film and press the
Resume button to continue
printing.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
Install the Film and press
Resume.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
Check that the Print Film is
installed properly and press
Resume.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
Ensure that the appropriate Print
Film is installed and press the
Resume button located on the
Printer to continue printing.
To cancel, press the Cancel Print
button or the Cancel button
located on the Printer.
A non-SecureMark Film is
installed in a SecureMark Printer.
Replace with the appropriate
SecureMark Film and press the
Resume button on the Printer to
continue printing.
To cancel, press the Cancel Print
button or the Cancel button on the
Printer.
Ensure that the appropriate Print
Film is installed and press the
Resume button located on the
Printer to continue printing.
To cancel, press the Cancel Print
L001130 Rev 1.4
88