Using The Device Options Tab; Detecting Supplies At Print Time Function - HID HDPii User Manual

Using the Device Options tab

This section describes the use of the Device Options tab.

Detecting Supplies at Print Time Function

Step Procedure
1 Use the Supplies checkbox for auto detection of the consumables, which are
the Ribbon and Film. See below.
•
In the Firmware, the values (representing the installed Ribbon and
installed Transfer Film) are updated on initialization (including each time
the cover is closed).
•
The Firmware compares the Ribbon and Film values in the PRN file to
HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
174