Specifying Udp Event Logging - HID HDPii User Manual

Specifying UDP Event logging

Follow this procedure to enable logging to a UDP Syslog program.
Step Procedure
1 Select the System Log link.
• The messages will be sent via UDP packets to the Syslog port (514) of
the specified host.
• It is up to the host program to listen to these messages for processing.
• A syslog host program is necessary to use this method, such as, Kiwi
Syslog Daemon or WinSysLog.
2 Select the link for the log name you want to view or configure (the default
HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
132