HID HDPii User Manual page 87

Invalid Ribbon The Ribbon installed does
not match the SecureMark
configuration of the
Printer.
Invalid Ribbon An incorrect Print Ribbon
has been installed in the
Printer.
Ribbon Error The Print Ribbon caused
a general error.
No Magnetic A print job with Magnetic
Encoder Installed encoding was sent with no
Magnetic encoder
installed in the Printer.
Mag Verify Error The Printer is unable to
verify encoded data.
No Mag Strip The Printer is unable to
Present find a Magnetic stripe on
the card.
No Smart Card No Smart Card Encoder is
Encoder installed in the Printer.
No Prox Card No Proximity Card
Encoder Encoder is installed in the
Printer.
Headlift Error The Headlift Sensor is not
detecting movement from
the Headlift Cam.
Invalid Password The Password entered is
HDPii High Definition Card Printer/Encoder User Guide
Install a Certified Print Ribbon and
press the Resume button located
on the Printer's LCD display to
continue printing.
To cancel the print, press the
Cancel Print button from the
Driver's display dialog and the
Cancel button located on the
Printer's LCD display.
Check that the Ribbon is correct
for the Printer and retry.
To cancel, click on Cancel Print.
Press the Resume button located
on Printer to continue.
To cancel, press the Cancel Print
button or the Cancel button
located on the Printer.
Ensure that no encoding data is
being sent with the print job and
reprint the card.
Check the Cards and click on
Cancel Print.
Check the Cards and click on
Cancel Print.
To cancel, click on Cancel Print.
To cancel, click on Cancel Print.
Reboot the Printer by cycling
power.
To cancel, press the Cancel Print
button.
Press OK to enter another
L001130 Rev 1.4
87