HID HDPii User Manual page 105

Telnet Command
help
reset
ping
Telnet Command
list all
diff
uptime
sysinfo
Ribbon
net
stored net
default net
user
HDPii High Definition Card Printer/Encoder User Guide
Command Purpose
commands.
Reset the Ethernet interface
for the HDPii
Printer/encoder.
Send a ping command to
another IP address as a test
of the Ethernet interface.
Command Purpose
Display all information about
this Printer.
Display all differences
between current and stored
network settings.
Display how long since the
interface was last reset.
Display information about
the Printer (i.e., label,
contact, location, Firmware
version and date, and serial
number).
Display information about
the installed Ribbon in the
Printer.
Display information about
the current network settings
of the Ethernet interface.
Display information about
the stored network settings
of the Ethernet interface.
Display information about
the default network settings
of the Ethernet interface.
Display information about
the defined User names and
their type (root or guest
privileges).
L001130 Rev 1.4
Command Format
reset
ping <IPADDR>
Command Format
list all
list diff
list uptime
list sysinfo
list Ribbon
list net
list stored net
list default net
list user
105