HID HDPii User Manual page 22

HDP Film 77ºF (25ºC) or lower for no longer than 1.5 years.
Storage
Temperature
Humidity 20% to 80% (non-condensing)
Input Hopper 100 cards (.030/.762mm)
Card Capacity
Interface • USB 2.0 (high speed)
• Ethernet with the internal Print Server
Maximum 2.125W / 54mmW
Accepted Card
Width
Maximum 3.375L / 85.6mmL
Accepted Card
Length
Mechanical
Locking override:
Security
The locking solenoid has a mechanical lock override (that allows
access to the secured areas of the Printer with the appropriate key).
This lock has a barrel-type key.
Restricted access:
With the cover closed and locked the user will not have access to
the following areas of the printer:
•
Reject Hopper
•
Flipper Access Door
•
Ribbon/Film Cartridge access area
•
Card Input Hopper
Memory 16MB RAM
Operating 65º F to 90º F (18º C to 32º C).
Temperature
• Magnetic stripe encoding dual-sided (simultaneous)
Options
• Smart card encoding (contact/contactless)
• Printer cleaning kit
Output Hopper 100 cards (.030mm)
Card Capacity
Physical Security The Printer has base-plate tie down points for physical security
HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
22