Switching To The Automatic Ip Address Mode - HID HDPii User Manual

Switching to the Automatic IP Address Mode

Step
1 Select the Network link from any web page of the Printer.
Select the Obtain an IP address automatically radio button to enable the
2 DHCP/BOOTP, which automatically assigns the network settings.
Even with this button selected, the User can enter Stored Settings, and the
Stored Settings will remain in memory. See below. (Note: This is the
default method.)
3 Click on the Submit button to save this setting.
Login as a root User if you are so prompted. (Note: Any change of setting
4 will only be accepted after you have successfully logged in.)
Reboot the Printer to affect this change.
5
HDPii High Definition Card Printer/Encoder User Guide
Procedure
L001130 Rev 1.4
115