Using The Configuration Tab; Using The Optional Printer Features Group Box; Using The Event Monitoring Group Box - HID HDPii User Manual

Using the Configuration Tab

Using the Optional Printer Features Group Box

The Default setting is checked.
• If checked, upon Configuration tab activation, the Driver retrieves the installed Printer
features information from the Firmware and automatically checks the appropriate check
boxes for Dual Sided and Magnetic Encoder.
• If checked, the Dual Sided and Magnetic Encoder checkboxes are read only.
• If checked and no Printer is found or bi-directional capabilities are disabled or unavailable,
the error message (shown below) is displayed.
• If unchecked or cleared, feature check boxes become active and can be manually set.
• If the Driver is reinstalled, it resets to the default of checked.

Using the Event Monitoring Group Box

This Event Monitoring group box displays the Low Supplies (Ribbon and Film).
•
The default setting is checked. If checked, the Ribbon Low message box is displayed
with every print job when Printer reports low Ribbon to the driver.
HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
249