HID HDPii User Manual page 83

Card Eject Error The Printer is unable to
eject a card.
Flipper Jam The Flipper Table has
jammed while either
aligning itself or flipping a
card.
No Flipper The Printer does not have
flipping capabilities.
Ribbon RFID Error The Ribbon tag
information is corrupted or
incorrect.
HDPii High Definition Card Printer/Encoder User Guide
Please check Printer for a card
jam or other obstruction and press
the Resume button located on the
Printer's LCD display to continue
printing.
To cancel the print, press the
Cancel Print button from the
Driver's display dialog or the
Cancel button located on the
Printer's LCD display.
a. Open the Printer's Output
Module Cover.
b. Clear any cards in the Output
Module by using the Forward
and/or Back buttons located
on the Printer's Front Cover.
c. Ensure that the Flipper Table
can rotate freely. Close the
Output Module Cover.
d. Press the Resume button on
the Printer's Front Cover to
continue printing.
a. To cancel the print, press the
Cancel Print button from the
Driver's display dialog.
a. Verify the Printer has flipper
capabilities via the LCD Menu.
b. If Output capabilities are
present, ensure that the Print
Both Sides option in the driver
is set correctly.
c. Press the Resume button on
the Printer's Front Cover to
continue printing.
d. To cancel the print, press the
Cancel Print button from the
Driver's display dialog or press
the Cancel button located on
the Printer's LCD display.
Check that the Ribbon is installed
properly. Cancel is the only
option.
Press the Cancel Print button
L001130 Rev 1.4
83