Adjusting The Ribbon Type - HID HDPii User Manual

Step Procedure
4 When the Supplies checkbox is not checked or it is de-selected (cleared)
from a selected state, the Ribbon and Film dropdown boxes become active
and auto selected Ribbon and Film types remain (until manually changed).

Adjusting the Ribbon Type

Use the Ribbon Type dropdown menu to match Ribbon type. See
Note: The Inhibit or I designation under YMCKI, indicates the
Ribbons, as needed. (
ability to prevent the transfer of film to the card surface. Users can select these
Ribbon types to prevent film from transferring over security features, signature panel
or other areas of special interest on the card surface.)
HDPii High Definition Card Printer/Encoder User Guide
Printer Components: Print
L001130 Rev 1.4
176