HID HDPii User Manual page 209

Category Description
Change the encoding mode and coercivity setting or modify the ISO
Magnetic
standards for tracks 1, 2 and 3, by correctly modifying these Magnetic
Encoding
Encoding options.
options
If you select ISO Encoding, you send down a formatted set of characters.
ISO
(Note: This selection activates the track tabs. However, all functions on
Encoding
the Track tabs are inactive/gray and display ISO defaults, which are the
defaults listed for each track below. The Shift Data Left check box
remains unchecked and inactive.)
If you select Custom Encoding, all options are active. The Default is
Custom
ISO Encoding. (Note: The defaults are the same as the ISO Encoding
Encoding
selection defaults. However, all functions on the Magnetic Track Options tabs are
(active and active.)
inactive
functions)
HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
209