Printer Components: Resin Thermal Transfer To Usb Interface Port - HID HDPii User Manual

Printer Components: Resin Thermal Transfer to USB Interface Port

Component Description
Resin Thermal Resin Thermal Transfer is the print method the Printer uses to print
Transfer sharp black text and crisp bar codes that can be read by both
infrared and visible-light bar code scanners.
Like dye-sublimation, this process uses the same thermal Printhead
to transfer color to a film from a resin-only Print Ribbon or the resin
black (K) panel of a full color Print Ribbon.
The difference, however, is that solid dots of resin-based ink are
transferred and fused to the surface of the film and then the film is
laminated onto the card surface. (Note: This produces very
durable, saturated printing.)
Card Cartridge Load blank cards into this Cartridge.
Card Output Stores 100 cards.
Hopper
LCD Display Displays the current status of the Printer.
Printhead The component of the Printer that actually does the printing. This
component is fragile and must not be bumped or touched with
anything other than a cleaning pen.
Softkey Buttons Current function is displayed above the button and will change
depending upon the Printer's mode of operation.
Card Cleaning Automatically cleans cards for higher print quality. (Note: Replace
Roller this Roller after every 1000+ cards or as needed.)
Power Port Connect to the included power supply.
USB Interface Connect to the Windows PC USB cable, LAN Connector.
Port
HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
26