Drain And Fill Plug Locations; Nv3550 Shift Mechanism; Nv3550 Identification; General Information - Jeep 200 Cherokee Service Manual

XJ
GENERAL INFORMATION (Continued)
1 – 3-4 FORK
2 – SHIFT SHAFT LEVER AND BUSHING
3 – 1-2 FORK
4 – FIFTH-REVERSE FORK
5 – SHIFT SHAFT
6 – REAR HOUSING
Fig. 2 NV3550 Identification
1 – PART NUMBER TAG
2 – IDENTIFICATION TAG
3 – FRONT OF REAR HOUSING
Fig. 1 NV3550 Shift Mechanism
7 – ROLL PIN
8 – SHIFT LEVER SOCKET
9 – SHAFT RAIL DETENTS
10 – FRONT HOUSING
11 – SHIFT SHAFT

LUBRICANT

DESCRIPTION
Required lubricant for the NV3550 is Mopar Man-
ual Transmission Lubricant, P/N 4761526. This is the
only lubricant to be used in NV3550 transmissions.
No other lubricants are acceptable, or recommended.
The correct transmission lubricant level is to the
bottom edge of the fill plug hole (Fig. 3).
The transmission must be level to obtain an accu-
rate lubricant level check. A drive–on type of hoist is
recommended for this purpose.
Lubricant capacity of the NV3500 is approximately
2.28 liters (4.8 pints). This represents the approxi-
mate quantity needed to refill the transmission after
a lubricant change or overhaul.

DRAIN AND FILL PLUG LOCATIONS

The NV3550 fill plug is located in the front hous-
ing. The drain plug is at the bottom rear of the hous-
ing (Fig. 3).

NV3550 MANUAL TRANSMISSION

21 - 43