Table of Contents
Advertisement
Warning light
GLOW PLUG PREHEATING FAILURE (Diesel versions)
The warning light will flash (a message will appear on the display, on some versions) to indicate a fault in the glow
plugs preheating system.
In this case, contact a Jeep Dealership as soon as possible.
LANESENSE SYSTEM
Versions with multifunction display
The warning light switches on as follows:
Warning light continuously on (white): the system is activated, but the lane limits were not detected (the lane lines are
grey).
Warning light on and flashing (amber): the car has approached the lane line and is about to pass it.
Warning light switched on continuously (green): the system has detected the limits of both lanes. The system will act
on the steering wheel if the lane was passed unintentionally.
Versions with reconfigurable multifunction display
On versions equipped with reconfigurable multifunction display, the warning light shown at the side is replaced with
dedicated graphic icons, displayed in the upper left area of the display. These icons are displayed according to the
same logic described for versions equipped with multifunction display (see previous description).
32) If a failure is present with sharp braking, the rear wheels may lock and the vehicle may swerve.
14) If, turning the starter switch to MAR, the
versions together with the message on the display), contact a Jeep Dealership as soon as possible.
15) If the warning light (or the icon on the display) flashes while driving, contact a Jeep Dealership.
What it means
WARNING
IMPORTANT
warning light does not turn on or if it turns on steadily or flashing while driving (on some
67
Advertisement
Table of Contents
