Advertisement

JEEP
SERVICE MANUAL
2002 WG
GRAND CHEROKEE
NO PART OF THIS PUBLICATION MAY BE
REPRODUCED,
STORED
IN
A
RETRIEVAL
SYSTEM, OR TRANSMITTED, IN ANY FORM OR
BY ANY MEANS, ELECTRONIC, MECHANICAL,
PHOTOCOPYING, RECORDING, OR OTHERWISE,
WITHOUT THE PRIOR WRITTEN PERMISSION
OF DAIMLERCHRYSLER CORPORATION.
DaimlerChrysler Corporation reserves the right to make changes in design or
to make additions to or improvements in its products without imposing any
obligations upon itself to install them on its products previously manufac-
tured.
Copyright © DaimlerChrysler Corporation

Advertisement

Table of Contents
loading

Summary of Contents for Jeep 2002 WG Grand Cherokee

  • Page 1 JEEP SERVICE MANUAL 2002 WG GRAND CHEROKEE NO PART OF THIS PUBLICATION MAY BE REPRODUCED, STORED RETRIEVAL SYSTEM, OR TRANSMITTED, IN ANY FORM OR BY ANY MEANS, ELECTRONIC, MECHANICAL, PHOTOCOPYING, RECORDING, OR OTHERWISE, WITHOUT THE PRIOR WRITTEN PERMISSION OF DAIMLERCHRYSLER CORPORATION.
  • Page 2 FOREWORD The information contained in this service manual has been prepared for the professional automotive tech- nician involved in daily repair operations. Information describing the operation and use of standard and optional equipment is included in the Owner’s Manual provided with the vehicle. Information in this manual is divided into groups.
  • Page 3 GROUP TAB LOCATOR Introduction Lubrication & Maintenance Suspension Driveline Brakes Cooling Audio Chime/Buzzer Electronic Control Modules Engine Systems Heated Systems Horn Ignition Control Instrument Cluster Lamps Message Systems Power Systems Restraints Speed Control Vehicle Theft Security Wipers/Washers Wiring Engine Exhaust System Frame &...
  • Page 4: Table Of Contents

    INTRODUCTION INTRODUCTION TABLE OF CONTENTS page page BODY CODE PLATE TORQUE REFERENCES DESCRIPTION ......1 DESCRIPTION .
  • Page 5: Fastener Identification

    INTRODUCTION FASTENER IDENTIFICATION (Continued) Fig. 2 FASTENER IDENTIFICATION...
  • Page 6 INTRODUCTION FASTENER IDENTIFICATION (Continued) Fig. 3 FASTENER STRENGTH...
  • Page 7: Description

    INTRODUCTION FASTENER USAGE THREADED HOLE REPAIR DESCRIPTION - FASTENER USAGE DESCRIPTION - THREADED HOLE REPAIR Most stripped threaded holes can be repaired using WARNING: USE OF AN INCORRECT FASTENER a Helicoil . Follow the vehicle or Helicoil recommen- MAY RESULT IN COMPONENT DAMAGE OR PER- dations for application and repair procedures.
  • Page 8: Metric System Description

    INTRODUCTION The following chart will assist in converting metric METRIC SYSTEM units to equivalent English and SAE units, or vise versa. DESCRIPTION The metric system is based on quantities of one, ten, one hundred, one thousand and one million. CONVERSION FORMULAS AND EQUIVALENT VALUES MULTIPLY TO GET MULTIPLY...
  • Page 9 INTRODUCTION METRIC SYSTEM (Continued) Fig. 4 METRIC CONVERSION CHART...
  • Page 10: Torque References Description

    INTRODUCTION tions Chart for torque references not listed in the TORQUE REFERENCES individual torque charts (Fig. 5). DESCRIPTION Individual Torque Charts appear within many or the Groups. Refer to the Standard Torque Specifica- Fig. 5 TORQUE SPECIFICATIONS...

Table of Contents