XJ
DISASSEMBLY AND ASSEMBLY (Continued)
1 – BRACKET
2 – PUMP ASSEMBLY
Fig. 5 Pulley Removal
1 – POWER STEERING PUMP DRIVE PULLEY
2 – SPECIAL TOOL C-4333
(2) Install O-ring seal in housing.
(3) Install reservoir onto housing.
(4) Slide and tap in new reservoir retainer clips
until tab locks to housing.
Fig. 4 Pump Mounting 4.0L RHD
1 – POWER STEERING PUMP DRIVE PULLEY
2 – SPECIAL TOOL C-4063–B
(5) Install power steering pump.
(6) Add power steering fluid, refer to Pump Initial
Operation.
STEERING
Fig. 6 Pulley Installation
19 - 9