Front Bearing Retainer Seal Installation; Remove Front Output Shaft Rear Bearing; Install Front Output Shaft Rear Bearing - Jeep 200 Cherokee Service Manual

21 - 392 NV242 TRANSFER CASE
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 55 Install Input Gear Pilot Bearing
1 – HANDLE C-4171
2 – INSTALLER 8128
3 – INPUT GEAR
Fig. 56 Front Bearing Retainer Seal Installation
1 – FRONT BEARING RETAINER
2 – SPECIAL TOOL 7884
(13) Install new bearing with Tool Handle C-4171
and Installer 5066 (Fig. 58). Lubricate bearing after
installation.
Fig. 57 Remove Front Output Shaft Rear Bearing
1 – REAR CASE
2 – SPECIAL TOOL L-4454–1 AND L-4454–3
3 – SPECIAL TOOL 8148
Fig. 58 Install Front Output Shaft Rear Bearing
1 – HANDLE C-4171
2 – OUTPUT SHAFT INNER BEARING
3 – INSTALLER 5066
(14) Install new seal in oil pump feed housing with
Special Tool 7888 (Fig. 59).
XJ