XJ
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 180 Installing Overdrive Planetary And Clutch
Assembly
1 – OVERDRIVE PLANETARY AND CLUTCH ASSEMBLY
2 – RING GEAR
Fig. 181 Installing Input Shaft Thrust Bearing And
Race Assembly
1 – THRUST BEARING AND RACE ASSEMBLY
2 – CLUTCH INPUT SHAFT
(72) Lubricate and install replacement O–ring on
oil pump body.
(73) Install oil pump in case. Align pump and case
bolt holes and carefully ease pump into place.
AW–4 AUTOMATIC TRANSMISSION
Fig. 182 Installing Oil Pump Thrust Race
1 – OIL PUMP
2 – PUMP THRUST RACE
CAUTION: Do not use force to seat the pump. The
seal rings on the stator shaft could be damaged if
they bind or stick to the direct clutch drum.
(74) Tighten oil pump bolts to 22 N·m (16 ft. lbs.)
torque.
(75) Verify input shaft rotation. Shaft should
rotate smoothly and not bind.
(76) Lubricate and install new O–ring on trans-
mission throttle cable adapter and install cable in
case (Fig. 183).
Fig. 183 Installing Transmission Throttle Cable
1 – THROTTLE CABLE
2 – THROTTLE CAM
21 - 293