Engine Ground Wire Location; Exhaust System Inlet Pipe Connection; Clutch Slave Cylinder; Transfer Case Shift Linkage — 4X4 - Jeep 200 Cherokee Service Manual

XJ
REMOVAL AND INSTALLATION (Continued)
Fig. 16 Engine Ground Wire Location
1 – RIGHT ENGINE MOUNT THROUGHBOLT NUT
2 – ENGINE GROUND WIRE
3 – OIL PAN
Fig. 17 Exhaust System Inlet Pipe Connection
1 – OIL PAN
2 – EXHAUST INLET PIPE FLANGE RETAINING BOLTS
3 – EXHAUST SYSTEM SUPPORT CLAMP
(35) Remove the exhaust system support clamp
(Fig. 17).
(36) Remove the clutch slave cylinder from the
clutch housing (Fig. 18).
2000 JEEP CHEROKEE
1 – CLUTCH SLAVE CYLINDER
2 – CLUTCH SLAVE CYLINDER RETAINING NUTS
3 – FRONT DRIVESHAFT
(37) Remove the (3) nuts retaining the transfer
case shift linkage and position the linkage aside (Fig.
19).
Fig. 19 Transfer Case Shift Linkage — 4x4
1 – FRONT DRIVESHAFT
2 – SHIFTER LINKAGE RETAINING NUTS
3 – TRANSFER CASE
4 – TRANSMISSION
ENGINE
Fig. 18 Clutch Slave Cylinder
9 - 19