Removing One–Way Clutch; Removing Planetary Thrust Washer; Checking Planetary Bushing - Jeep 200 Cherokee Service Manual

21 - 306 AW–4 AUTOMATIC TRANSMISSION
DISASSEMBLY AND ASSEMBLY (Continued)
(19) Remove one–way clutch and outer race as
assembly. Then separate race from clutch (Fig. 218).
Fig. 218 Removing One–Way Clutch
1 – ONE-WAY CLUTCH AND OUTER RACE ASSEMBLY
2 – PLANETARY GEAR
3 – RACE
4 – CLUTCH
(20) Remove thrust washer (Fig. 219).
(21) Check inside diameter of planetary gear bush-
ing (Fig. 220). Maximum inside diameter is 11.27
mm (0.4437 in.). Replace planetary gear if bushing
inside diameter is greater then specified.
Fig. 219 Removing Planetary Thrust Washer
1 – THRUST WASHER
2 – PLANETARY GEAR
Fig. 220 Checking Planetary Bushing
1 – PLANETARY BUSHING
2 – PLANETARY GEAR
XJ