B-Pillar Trim Installation; C-Pillar Trim Removal And Installation; B-Pillar Trim—4-Door Vehicles - Jeep 200 Cherokee Service Manual

XJ
REMOVAL AND INSTALLATION (Continued)
1 – UPPER DOOR OPENING TRIM
2 – C-PILLAR TRIM
3 – UPPER QUARTER PANEL TRIM
4 – LIFTGATE PILLAR TRIM
5 – WHEEL HOUSE COVER
6 – LOWER QUARTER PANEL TRIM
7 – QUARTER PANEL TRIM EXTENSION
8 – COAT HOOK
9 – OVERHEAD ASSIST HANDLE
INSTALLATION
(1) Route the shoulder belt through the lower
B-pillar trim (2-door vehicles).
(2) Position the B-pillar trim on the B-pillar and
align push-in fasteners.
(3) Press the B-pillar trim on the B-pillar to
secure.
(4) Install the screws attaching the B-pillar trim to
the B-pillar (2-door vehicles).
(5) Install the seat/shoulder belt anchor bolt.
(6) Install the shoulder belt turning loop.
(7) Install the A-pillar trim.
(8) Install the upper quarter panel trim (2-door
vehicles) (Fig. 65).
(9) Install the upper door opening trim (4-door
vehicles) (Fig. 68).
Fig. 68 B-Pillar Trim—4-Door Vehicles
10 – INNER SCUFF PLATE
11 – PUSH-IN FASTENER
12 – ACCESS DOOR
13 – NUT
14 – COWL PANEL TRIM
15 – A-PILLAR TRIM
16 – HEADLINER
17 – B-PILLAR TRIM
18 – TRIM PLUG
C-PILLAR TRIM
REMOVAL
to the C-pillar (Fig. 68).
INSTALLATION
(10) Install the inner scuff plate.
(1) Remove the inner scuff plate.
(2) Remove the upper door opening trim.
(3) Remove the upper quarter panel trim.
(4) Remove the quarter panel trim extension.
(5) Remove the screws attaching the C-pillar trim
(6) Separate the C-pillar trim from the C-pillar.
(1) Position the C-pillar trim on the C-pillar.
BODY 23 - 53