Installing Direct Clutch Discs And Plates; Install Clutch Pack Retainer; Adjusting Clutch Pack Snap Ring Position; Checking Direct Clutch Assembled Height - Jeep 200 Cherokee Service Manual

21 - 316 AW–4 AUTOMATIC TRANSMISSION
DISASSEMBLY AND ASSEMBLY (Continued)
Fig. 248 Installing Direct Clutch Discs And Plates
1 – CLUTCH PLATES
2 – CLUTCH DISCS
Fig. 249 Install Clutch Pack Retainer
1 – CLUTCH PACK RETAINER
2 – RETAINER
3 – SNAP RING
Fig. 250 Adjusting Clutch Pack Snap Ring Position
1 – CLUTCH PACK SNAP RING
2 – DRUM NOTCH
3 – SHIFT SNAP RING END GAP AWAY FROM DRUM NOTCHES
Fig. 251 Checking Direct Clutch Assembled Height
1 – DIRECT CLUTCH
2 – HEIGHT SHOULD BE 70.3-71.5 mm (2.767-2.815 in.)
3 – FORWARD CLUTCH
XJ