Jeep 2008 Grand Cherokee Owner's Manual

Table of Contents

Quick Links

Download this manual

SECTION

INTRODUCTION

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

UNDERSTANDING YOUR INSTRUMENT PANEL

STARTING AND OPERATING

WHAT TO DO IN EMERGENCIES

MAINTAINING YOUR VEHICLE

MAINTENANCE SCHEDULES

IF YOU NEED CONSUMER ASSISTANCE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 469

INDEX

TABLE OF CONTENTS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .369

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .459

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181

PAGE

Table of Contents

Chapters

Table of Contents

Summary of Contents for Jeep 2008 Grand Cherokee

Page 1: Introduction
TABLE OF CONTENTS SECTION ............. 3 INTRODUCTION THINGS TO KNOW BEFORE STARTING YOUR VEHICLE UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 3: Table Of Contents
CONTENTS Introduction ......4 Rollover Warning ......5 How To Use This Manual .
Page 4: Introduction
4 INTRODUCTION INTRODUCTION This is a specialized utility vehicle designed for both on-road and off-road use. It can go places and perform tasks for which conventional two-wheel drive vehicles were not intended. However, on-road ride and handling will have a different feel from what drivers experience with other vehicles, so take time to become familiar with your vehicle.
Page 5: Rollover Warning
NOTE: After you read the manual, it should be stored in the vehicle for convenient reference and remain with the vehicle when sold so that the new owner will be aware of all safety warnings. When it comes to service, remember that your authorized dealer knows your vehicle best, has the factory-trained technicians and genuine Mopar parts, and is interested in your satisfaction.
Page 6: How To Use This Manual
6 INTRODUCTION Failure to use driver and passenger seat belts provided is a major cause of severe or fatal injury. In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year, and could reduce disabling injuries by 2 million annually.
Page 7 INTRODUCTION 7...
Page 8: Warnings And Cautions
8 INTRODUCTION WARNINGS AND CAUTIONS This manual contains WARNINGS against operating procedures, which could result in an accident or bodily injury. It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
Page 9: Vehicle Modifications/Alterations
INTRODUCTION 9 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....14 Wireless Ignition Node (WIN) ... . .14 FOB With Integrated Key (FOBIK) .
Page 12 12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Programming Additional Transmitters ..25 Transmitter Battery Service ....25 General Information ....26 Remote Starting System —...
Page 13 Engine Break-In Recommendations ...68 Safety Tips ......69 Exhaust Gas .
Page 14: A Word About Your Keys
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Fob with Integrated Key and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the double-sided integrated key into the igni- tion switch with either side up.
Page 15: Fob With Integrated Key (Fobik)
Fob with Integrated Key (FOBIK) The Fob with Integrated Key operates the ignition switch. It also contains the Remote Keyless Entry (RKE) trans- mitter and a valet key, which stores in the rear of the Fob. The valet key allows for entry into the vehicle should the battery in the vehicle or the Fob go dead.
Page 16: Ignition Key Removal
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Ignition Key Removal Place the selector lever in “P” (Park). Turn the key to the LOCK position, and remove the key. NOTE: • If you try to remove the key before you place the selector lever in “P”...
Page 17: Key-In-Ignition Reminder
CAUTION! An unlocked car is an invitation to thieves. Always remove key from the ignition and lock all doors when leaving the vehicle unattended. Key-In-Ignition Reminder If you open the driver’s door and the key is in the ignition, a chime will sound to remind you to remove the key.
Page 18: Replacement Keys
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE flash after the bulb check, it indicates that someone used an invalid Fob to start the engine. Either of these condi- tions will result in the engine being shut off after two (2) seconds.
Page 19: Customer Key (Fob) Programming
location. This number is required for dealer replacement of Fobs. Duplication of Fobs may be performed at an authorized dealer or by using the Customer Key Pro- gramming procedure. This procedure consists of pro- gramming a blank Fob to the vehicle electronics. A blank Fob is one, which has never been programmed.
Page 20: General Information
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If a programmed key is lost, see your dealer to have all remaining keys erased from the systems memory. This will prevent the lost key from starting your vehicle. The remaining keys must then be repro- grammed.
Page 21: To Disarm The System
the door lock plunger located on the inside of the doors or with the driver’s door key lock cylinder, will not set the alarm. To Disarm the System To disarm the system, use the remote keyless entry transmitter. If something has triggered the system in your absence, the horn will sound three times when you unlock the doors.
Page 22: To Unlock The Doors
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Inserting the Fob with Integrated Key into the ignition switch disables all buttons on that transmitter; however, the buttons on the remaining transmitters will continue to work. Shifting the vehicle out of “P” (Park) disables all transmitter buttons for all Fobs.
Page 23: To Lock The Doors
Flash Lights with Remote Key Lock This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the transmitter. This feature can be turned on or off. To change the current setting, proceed as follows: •...
Page 24: To Release The Liftgate Flipper Glass
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Release the Liftgate Flipper Glass Press the “Flipper Glass/Trunk Release” button on the transmitter two times to release the flipper glass. WARNING! Driving with the flipper glass open can allow poi- sonous exhaust gases into your vehicle.
Page 25: Things To Know Before Starting Your Vehicle 25
Programming Additional Transmitters Refer to SENTRY KEY “Customer Key (Fob) Program- ming.” If you do not have a programmed transmitter, contact your dealer for details. Transmitter Battery Service The recommended replacement battery is one CR2032 battery. NOTE: Perchlorate Material — special handling may apply.
Page 26: General Information
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. •...
Page 27 Remote Start Button Once the vehicle has started, the engine will run for 15 minutes. To cancel remote start, press the “Remote Start” button once. The parking lamps will remain illuminated to indicate that the vehicle has remote started and the engine is running.
Page 28: Door Locks
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The vehicle can be started remotely up to a maximum of two times. The vehicle is also allowed a maximum of one failed start, where the remote start sequence was initiated but the engine stopped cranking without starting. After either of these conditions, or if the Vehicle Theft Alarm is alarming, or if the PANIC button was pressed, the vehicle must be reset by inserting a valid key into the ignition...
Page 29 Power Door Lock Switch If the plunger is down when the door is closed, the door will lock. Therefore, make sure the keys are not inside the vehicle before closing the door. If you press the door lock switch while the keys are in the ignition switch, and the driver’s door is open, the doors will not lock.
Page 30: Child Protection Door Lock
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Protection Door Lock The rear doors of your vehicle are equipped with child protection locks. If you push up on the lever on the open edge of the door it cannot be opened from the inside of the vehicle.
Page 31: Windows
WINDOWS Power Windows The power window controls are located on the driver’s door trim panel. There is a single switch on the front passenger door/rear doors which operates the front passenger/rear passenger door windows. The window controls will operate only when the ignition switch is in the ON or ACCESSORY position.
Page 32 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto Down Both the driver and front passenger window switch has an “Auto Down” feature. Press the window switch past the first detent, release, and the window will go down automatically. To cancel the “Auto Down” movement, operate the switch in either the up or down direction and release the switch.
Page 33: Wind Buffeting
WARNING! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. Resetting the Auto-Up Feature Should the Auto-Up feature stop working the window probably needs to be reset. To reset Auto-Up: Pull the window switch up and close the window com- pletely, then pull and hold the switch for 1 second.
Page 34: Liftgate
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE open or partially open positions. This is a normal occur- rence and can be minimized. If the buffeting occurs with the sunroof open, adjust the sunroof opening to minimize the buffeting. LIFTGATE To open the liftgate, pull up (squeeze) on the handle and lift.
Page 35: Liftgate Flipper Glass
WARNING! Driving with the liftgate open can allow poisonous exhaust gases into your vehicle. You and your pas- sengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. Liftgate Flipper Glass The liftgate flipper glass is also unlocked when the liftgate is unlocked.
Page 36: Occupant Restraints
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Once the liftgate flipper glass has been opened, connec- tion to the rear window wiper is interrupted, preventing activation of the rear wiper blade while the flipper glass is open. NOTE: If a power malfunction to the power liftgate latch should occur, an emergency liftgate latch release can be used to open the liftgate.
Page 37: Lap/Shoulder Belts
WARNING! In a collision, you and your passengers can suffer injuries, including fatalities, if you are not properly buckled up. You can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly.
Page 38: Lap/Shoulder Belt Operating Instructions
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Wearing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body. These are the strongest parts of your body and can take the forces of a collision the best. Wearing your belt in the wrong place could make your injuries in a collision much worse.
Page 39 3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” Latch Plate To Buckle THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 WARNING! A belt that is buckled into the wrong buckle will not protect you properly.
Page 40 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your abdomen. To remove slack in the lap portion, pull up a bit on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt.
Page 41: Adjustable Upper Shoulder Belt Anchorage
6. To release the belt, push the red button marked PRESS on the buckle. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow it to retract fully. WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection.
Page 42: Automatic Locking Mode - If Equipped
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE As a guide, if you are shorter than average, you will prefer a lower position, and if you are taller than average, you’ll prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position.
Page 43: Seat Belt Pretensioners
WARNING! • The belt and retractor assembly must be replaced if the seat belt assembly “automatic locking retrac- tor” feature or any other seat belt function is not working properly when checked according to the procedures in the Service Manual. •...
Page 44 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE seconds or until the driver’s seat belt is buckled. The Enhanced Warning System (BeltAlert) will be reactivated if the driver’s seat belt is unbuckled for more than 10 seconds and the vehicle speed is greater than 5 mph (8 km/h).
Page 45: Seat Belts And Pregnant Women
Seat Belts and Pregnant Women We recommend that pregnant women use the seat belts throughout their pregnancy. Keeping the mother safe is the best way to keep the baby safe. Pregnant women should wear the lap part of the belt across the thighs and as snug across the hips as possible.
Page 46: Driver And Front Passenger Supplemental Restraint Systems (Srs)
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Driver And Front Passenger Supplemental Restraint Systems (SRS) 1 — Driver Airbag 2 — Passenger Airbag 3 — Knee Bolster This vehicle has airbags for both the driver and right front passenger as a supplement to the seat belt restraint systems.
Page 47 Window Airbag Location NOTE: Airbag covers may not be obvious in the interior trim; but they will open to allow airbag deployment. THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 WARNING! • Do not put anything on or around the front airbag covers or attempt to manually open them.
Page 48 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Do not use a clothing bar mounted to the coat hooks in this vehicle. A clothing bar will impede the proper performance of the window bags. The front airbags have a multi stage inflator design. This allows the airbag to have different rates of inflation that are based on collision severity.
Page 49 up in the rear seat. Never allow children to slide the shoulder belt behind them or under their arm. If a child from 1 to 12 years old must ride in the front passenger seat because the vehicle is crowded, move the seat as far back as possible, and use the proper child restraint.
Page 50 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly. In some collisions the airbags won’t deploy at all. Always wear your seat belts even though you have airbags.
Page 51 How The Airbag System Works • The Occupant Restraint Control (ORC) Module de- termines if a frontal, side, or rollover collision is severe enough to require the front and/or side airbags to inflate. The front airbag inflators are designed to provide different rates of airbag inflation from direc- tion provided by the ORC.
Page 52 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The Driver and Passenger Airbag/Inflator Units are located in the center of the steering wheel and the right side of the instrument panel. When the ORC detects a collision requiring the airbags, it signals the inflator units.
Page 53 • The Knee Impact Bolsters help protect the knees of the driver and the front passenger, and position every- one for the best interaction with the front airbag. If A Deployment Occurs The airbag system is designed to deploy when the Occupant Restraint Control (ORC) Module detects a moderate-to-severe frontal collision, to help restrain the driver and front passenger, and then to immediately...
Page 54 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • It is not advisable to drive your vehicle after the airbags have deployed. If you are involved in another collision, the airbags will not be in place to protect you. WARNING! Deployed airbags and seat belt pretensioners cannot protect you in another collision.
Page 55 Maintaining Your Airbag System WARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. You could be injured if the airbag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right side of the instrument panel.
Page 56 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE block for blown fuses. Refer to “Fuse Panel” in Section 5 of this manual. See your dealer if the fuse is good. Event Data Recorder (EDR) In the event of an accident, your vehicle is designed to record up to 5-seconds of specific vehicle data parameters (see the following list) in an event data recorder prior to the moment of airbag deployment, or near deployment,...
Page 57 accessing the electronic data stored, unless ordered to download data by a court with legal jurisdiction (i.e., pursuant to a warrant). A copy of the data will be provided to the custodial entity upon request. General data that does not identify particular vehicles or crashes may be released for incorporation in aggregate crash databases, such as those maintained by the US govern- ment and various states.
Page 58: Child Restraint
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Engine control status (including engine speed) • Transmission gear selection • Cruise control status • Traction/stability control status • Tire pressure monitoring system status Child Restraint Everyone in your vehicle needs to be buckled up all the time —...
Page 59 Infants and Child Restraints • Safety experts recommend that rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). Two types of child restraints can be used rearward-facing: infant carriers and “convertible” child seats. •...
Page 60 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some tips for getting the most out of your child restraint: • Before buying any restraint system, make sure that it has a label certifying that it meets all applicable Safety Standards.
Page 61 buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle-end belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out. •...
Page 62 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE belt-positioning booster seat. The child and belt- positioning booster seat are held in the vehicle by the lap/shoulder belt. Children Too Large for Booster Seats Children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the seat back, should use the lap/shoulder belt in a rear seat.
Page 63 kits or retro-fit kits. You are urged to take advantage of all the available attachments provided with your child re- straint in any vehicle. NOTE: When using the LATCH attaching system to install a child restraint, please ensure that all seat belts not being used for occupant restraints are stowed and out of reach of children.
Page 64 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE install the child restraint. You will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces. Latch Anchorages In addition, there are tether strap anchorages behind each rear seating position located on the back of the seat.
Page 65 hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap. You will first loosen the adjusters on the lower straps and on the tether strap so that you can more easily attach the hooks or connectors to the vehicle anchorages.
Page 66 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE however, any seat belt system will loosen with time, so check the belt occasionally and pull it tight if necessary. For seat belts having an automatic locking retractor, pull the belt from the retractor until there is enough to allow you to pass through the child restraint and slide the latch plate into the buckle.
Page 67 Tether Strap Mounting THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 WARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap.
Page 68: 68 Things To Know Before Starting Your Vehicle
68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS A long break-in period is not required for the engine in your new vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.
Page 69: Safety Checks You Should Make Inside The
SAFETY TIPS Exhaust Gas WARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing (CO) follow the safety tips below. •...
Page 70: Safety Checks You Should Make Outside The Vehicle
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat belt assemblies must be replaced after an accident if they have been damaged (bent retractor, torn webbing, etc.). If there is any question regarding belt or retractor condition, replace the belt. Airbag Warning Light The light should come on and remain on for 6 to 8 seconds as a bulb check when the ignition switch is first...
Page 71 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors .......77 Inside Day/Night Mirror ....77 Automatic Dimming Mirror —...
Page 72 72 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Things You Should Know About Your UConnect™ System ....100 General Information ....108 Seats .
Page 73 SmartBeams — If Equipped ....125 Instrument Panel And Interior Lights ..126 Daytime Running Lights — If Equipped ..127 Automatic Headlight Leveling —...
Page 74 74 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Vary The Speed Setting ....137 To Accelerate For Passing ....137 Electronic Brake Control System .
Page 75 Sunglasses Storage ....158 Garage Door Opener — If Equipped ..158 Programming HomeLink .
Page 76 76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Area Features ..... 172 Cargo Light ......172 Rear Storage Compartment .
Page 77: Mirrors
MIRRORS Inside Day/Night Mirror The mirror should be adjusted to center on the view through the rear window. Adjusting Rear View Mirror UNDERSTANDING THE FEATURES OF YOUR VEHICLE 77 A two-point pivot system allows for horizontal and vertical adjustment of the mirror. Annoying headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle).
Page 78: Automatic Dimming Mirror - If Equipped
78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for annoying headlight glare from vehicles behind you. You can turn the feature on or off by pressing the button at the base of the mirror. A light next to the button will indicate when the dimming feature is activated.
Page 79: Exterior Mirrors Folding Feature
WARNING! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side convex mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger side convex mirror.
Page 80: Heated Remote Control Mirrors - If Equipped
80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE After selecting a mirror move the knob in the same direction you want the mirror to move. Use the center off position to guard against accidentally moving a mirror position. Power Mirror Switches Power mirror preselected positions can be controlled by the optional Memory Seat Feature.
Page 81: Hands-Free Communication (Uconnect™) - If Equipped
Lighted Vanity Mirror Sun Visor Extension (If Equipped) This feature has a pull out extension on the sun visor for increased coverage. UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 HANDS–FREE COMMUNICATION (UConnect™) — IF EQUIPPED NOTE: The sales code RER radio contains an inte- grated Hands-Free Communication (UConnect™) sys- tem.
Page 82 NOTE: For UConnect™ customer support, visit the following web sites: • www.chrysler.com/uconnect • www.dodge.com/uconnect • www.jeep.com/uconnect • or call 1–877–855–8400 UConnect™ allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle, and enables you to mute the system’s micro- phone for private conversation.
Page 83: Operation
radio or the mirror has the two control buttons (Phone Button and Voice Recognition Button) that will enable you to access the system. Voice Recognition Button Actual button location may vary with radio. The individual buttons are described in the “Operation”...
Page 84 84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • For certain operations, compound commands can be used. For example, instead of saying Setup and then Phone Pairing, the following compound command can be said: Setup Phone Pairing. • For each feature explanation in this section, only the combined form of the voice command is given.
Page 85 To complete the pairing process, you will need to refer- ence your cellular phone owner’s manual. The UCon- nect™ website may also provide detailed instructions for pairing. The following are general phone to UConnect™ System pairing instructions: • Press the “Phone” button to begin. •...
Page 86 86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dial by Saying a Number • Press the “Phone” button to begin. • After the Ready prompt and the following beep, say Dial. • System will prompt you to say the number you want call.
Page 87 Add Names to Your UConnect™ Phonebook NOTE: Adding names to phone book is recommended when vehicle is not in motion. • Press the “Phone” button to begin. • After the Ready prompt and the following beep, say Phonebook New Entry. •...
Page 88 88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Exchange Profile (OBEX). Please see your phone owners’ manual for specific instructions on how to send these entries from your phone. NOTE: • Phone handset must support Bluetooth OBEX trans- fers of phonebook entries to use this feature. •...
Page 89 Phonebook Edit can be used to add another phone number to a name entry that already exists in the phonebook. For example, the entry John Doe may have a mobile and a home number, but you can add John Doe’s work number later using the Phonebook Edit feature.
Page 90: Phone Call Features
90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After confirmation, the phone book entries will be deleted. • Note that only the phone book in the current language is deleted. List All Names in the UConnect™ Phonebook • Press the “Phone” button to begin. •...
Page 91 call, press and hold the ’Phone’ button until you hear a single beep indicating that the incoming call was rejected. Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in progress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone.
Page 92 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Conference Call When two calls are in progress (one active and one on hold), press and hold the “Phone” button until you hear a double beep indicating that the two calls have been joined into one conference call.
Page 93: Uconnect™ System Features
been switched to off. Call continuation functionality available on the vehicle can be any one of three types: • After ignition key is switched off, a call can continue on the UConnect™ system either until the call ends or until the vehicle battery condition dictates cessation of the call on the UConnect™...
Page 94 94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Emergency Assistance If you are in an emergency and the mobile phone is reachable: • Pick up the phone and manually dial the emergency number for your area. If the phone is not reachable and the UConnect™ system is operational, you may reach the emergency number as follows: •...
Page 95 Please refer to the 24-Hour “Towing Assistance” cover- age details in the Warranty information booklet and on the 24–Hour Towing Assistance Card. Paging To learn how to page refer to Working with Automated Systems. Paging works properly except for pagers of certain companies which time-out a little too soon to work properly with the UConnect™...
Page 96 96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE entries. To use this feature, dial the number you wish to call and then press the “Voice Recognition” button and say “Send.” The system will prompt you to enter the name or number, say the name of the phonebook entry you wish to send.
Page 97 notification to inform you of your phone and network status when you are attempting to make a phone call using UConnect™. The status is given for roaming, network signal strength, phone battery strength, etc. Dialing Using the Cellular Phone Keypad You can dial a phone number with your cellular phone keypad and still use the UConnect™...
Page 98: Advanced Phone Connectivity
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Advanced Phone Connectivity Transfer Call to and from Cellular Phone The UConnect™ system allows on going calls to be transferred from your cellular phone to the UConnect™ system without terminating the call. To transfer an ongo- ing call from your UConnect™...
Page 99 • Press the “Phone” button to begin. • After the Ready prompt and the following beep, say Setup Select Phone and follow the prompts. • You can also press the “Voice Recognition” button anytime while the list is being played, and then choose the phone that you wish to select.
Page 100: Things You Should Know About Your Uconnect™ System
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Things You Should Know About Your UConnect™ System UConnect™ Tutorial To hear a brief tutorial of the system features, press the “Phone” button and say “UConnect™ Tutorial.” Voice Training For users experiencing difficulty with the system recog- nizing their voice commands or numbers, the UCon- nect™...
Page 101 • Speak normally, without pausing, just as you would speak to a person sitting approximately eight (8) feet away from you. • Make sure that no one other than you is speaking during a voice recognition period. • Performance is maximized under: •...
Page 102 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, and • dry weather condition. •...
Page 103 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103...
Page 104 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105...
Page 106 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Primary Alternate(s) zero three four five seven eight nine star (*) plus (+) pound (#) add location Voice Commands Primary Alternate(s) call cancel confirmation prompts. continue delete dial download edit emergency English erase all Espanol...
Page 107 Voice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry pager pair a phone phone pairing pairing phonebook phone book previous record again redial UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Voice Commands Primary Alternate(s) return to main menu return or main menu select phone...
Page 108: General Information
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. •...
Page 109 WARNING! Do not ride with the seatback reclined so that the seat belt is no longer resting against your chest. In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked.
Page 110: Manual Lumbar Support Adjustment
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Lumbar Support Adjustment The manual lumbar support adjustment lever is located on the right side of the driver’s seat (all models) and on the left side of the passenger’s seat (if equipped). Moving the lumbar control lever fore and aft increases or de- creases the lumbar support.
Page 111: Way Passenger's Power Seat - If Equipped
4 - Way Passenger’s Power Seat — If Equipped The front passenger’s power seat switches are located on the outboard side of the passenger seat lower side trim. The bottom switch controls forward/rearward adjust- ment. The top switch controls the seatback recline adjust- ment.
Page 112 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE center of the instrument panel. After turning on the ignition, you can choose from High, Low, or Off heat settings. Amber LEDs on the side of each switch indicate the level of heat in use. Two LEDs are illuminated for high, one for low, and none for off.
Page 113: Rear Heated Seats - If Equipped
WARNING! Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially if used for long periods of time.
Page 114 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE heating. Pressing the switch a second time will select low-level heating. Pressing the switch a third time will shut the heating elements off. When high-temperature heating is selected, the heaters provide a boosted heat level during the first four minutes of operation after heating is activated.
Page 115: 60/40 Split Rear Seat
60/40 Split Rear Seat To Lower Rear Seat Either side of the rear seat can be lowered to allow for extended cargo space and still maintain some rear seating room. NOTE: Be sure that the front seats are fully upright and positioned forward.
Page 116 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Fold the rear seat completely forward. Folding Rear Seat To Raise Rear Seat Raise the rear seatback and lock it into place. If interfer- ence from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position.
Page 117 Storage — Rear Seat Armrest (If Equipped) The rear seat may be equipped with a center storage armrest. Rear Seat Armrest UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 Press the latch and lift the top of the armrest to access the storage bin.
Page 118: Driver Memory Seat - If Equipped
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE DRIVER MEMORY SEAT — IF EQUIPPED Once programmed, the memory buttons 1 and 2 on the driver’s door panel can be used to recall the driver’s seat, driver’s outside mirror, adjustable brake and accelerator pedals, and radio station preset settings.
Page 119: Memory
3. Adjust the driver’s seat, recliner, and driver’s side view mirror to the desired positions. 4. Adjust the brake and accelerator pedals to the desired positions. 5. Turn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set). 6.
Page 120: Memory Position Recall
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Memory Position Recall NOTE: The vehicle must be in Park to recall memory positions. If a recall is attempted when the vehicle is not in Park, a message will be displayed in the Electronic Vehicle Information Center (EVIC).
Page 121: Easy Entry/Exit Seat
NOTE: Once programmed, all transmitters linked to memory can be easily enabled or disabled at one time. Refer to Remote Linked to Memory under Electronic Vehicle Information Center (EVIC) — Customer Pro- grammable Features in Section 4 for more information. Easy Entry/Exit Seat This feature provides automatic driver’s seat positioning which will enhance driver mobility out of and into the...
Page 122: To Open And Close The Hood
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE through the programmable features in the Electronic Vehicle Information Center (EVIC). Refer to Electronic Vehicle Information Center (EVIC) — Customer Pro- grammable Features in Section 4 for more information. TO OPEN AND CLOSE THE HOOD To open the hood, pull the release lever inside your vehicle located below the instrument panel and in front of the driver’s door.
Page 123: Lights
WARNING! If the hood is not fully latched, it could fly up when the vehicle is moving and block your forward vision. Be sure all hood latches are fully latched before driving. LIGHTS Multi-Function Control Lever The multi-function control lever controls the operation of the headlights, turn signals, headlight beam selection, instrument panel light dimming, passing light, interior courtesy/dome lights, and optional fog lights.
Page 124: Lights
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Battery Saver Feature—Exterior/Interior Lights If the multi-function control lever is left in the interior light position, parking light position, or the headlight position when the ignition switch is moved to the OFF position, the battery saver feature will automatically turn off the exterior and interior lights after eight minutes.
Page 125: Smartbeams - If Equipped
This system performs two functions. With the engine running and the multi-function control lever in the A (Auto) position, the headlights will turn on and off based on the surrounding light levels. Headlights On Automatically With Wipers If your vehicle is equipped with Automatic Headlights it also has this customer programmable feature.
Page 126: Instrument Panel And Interior Lights
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Activate 1. Select “Auto Headlamp Low/High Beams? — Low/ High Beam.” Refer to “EVIC — Customer Programmable Features” in Section 4 of this manual. 2. Turn the end of the multi-function control lever to the A (Auto) headlight position.
Page 127: Daytime Running Lights - If Equipped
even when the doors and liftgate are open. While in the “Off” position the instrument panel lighting is at the lowest light level and may not be suitable for night driving. Daytime Running Lights — If Equipped The high beam headlights come on at a low intensity level whenever the engine is running, and the transmis- sion in not in the P (Park) position.
Page 128: Turn Signals
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Proper aim and adjustments of the front fog lights should be made to prevent excessive glare for other drivers. Turn Signals Move the multi-function control lever up or down and the arrows on each side of the instrument cluster will flash to show proper operation of the front and rear turn signal lights.
Page 129: Interior Lights
Interior Lights The interior lighting consists of courtesy lights mounted below the instrument panel, an overhead console light assembly which contains both driver and passenger reading lights, reading lights located above the rear doors, and a rear cargo light. Opening a door or turning the center of the multi-function control lever to the extreme up position will activate all interior courtesy lights.
Page 130 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE section. For information on the rear wiper and washer, refer to “Rear Window Features” in this section. Windshield Wiper/Washer Switch NOTE: Always remove any build-up of snow that prevents the windshield wiper blades from returning to the OFF position.
Page 131: Mist
Mist Use this feature when weather conditions make occa- sional usage of the wipers necessary. Pull down and release the control lever for a single wiping cycle. Speed Sensitive Intermittent Wiper System Use one of the five intermittent wiper speeds when weather conditions make a single wiping cycle, with a variable pause between cycles, desirable.
Page 132 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • The rain sensing feature will not operate when the wiper switch is in the LOW or HIGH speed position. • The rain sensing feature may not function properly when ice, or dried salt water is present on the wind- shield.
Page 133: Tilt/Telescoping Steering Column
TILT/TELESCOPING STEERING COLUMN This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steering wheel at the end of the steering column.
Page 134: Adjustable Pedals - If Equipped
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ADJUSTABLE PEDALS — IF EQUIPPED This feature allows both the brake and accelerator pedals to move toward the driver to provide improved position with the steering wheel. The adjustable pedal system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position.
Page 135: Electronic Speed Control - If Equipped
CAUTION! Do not place any article under the adjustable pedal’s or impede its ability to move as it may cause damage to the pedal controls. Pedal travel may become lim- ited if movement is stopped by an obstruction in the adjustable pedal’s path.
Page 136: To Activate
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Activate Push the ON/OFF button. The CRUISE indicator in the instrument cluster will illuminate. To turn the system OFF, push the ON/OFF button a second time. The CRUISE indicator will turn off. The system should be turned OFF when not in use.
Page 137: To Resume Speed
To Resume Speed To resume a previously set speed, push the “RESUME ACCEL” lever up and release. Resume can be used at any speed above 25 mph (40 km/h) for 3.7L, 4.7L, and 5.7L engines, and 14 mph (23 km/h) for 3.0L diesel engines. To Vary The Speed Setting When the speed control is ON, speed can be increased by pushing up and holding “RESUME ACCEL”.
Page 138: Electronic Brake Control System
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using Speed Control On Hills The automatic transmission may downshift on hills to maintain the vehicle set speed. NOTE: The speed control system maintains speed up and down hills. A slight speed change on moderate hills is normal.
Page 139: Tcs (Traction Control System)
WARNING! ABS (Anti-Lock Brake System) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ABS cannot prevent accidents, in- cluding those resulting from excessive speed in turns, driving on very slippery surfaces, or hydro- planing.
Page 140: Bas (Brake Assist System)
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE BAS (Brake Assist System) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sens- ing the rate and amount of brake application and then applies optimum pressure to the brakes.
Page 141: Erm (Electronic Roll Mitigation)
ERM (Electronic Roll Mitigation) This system anticipates the potential for wheel lift by monitoring the driver’s steering wheel input and the speed of the vehicle. When ERM determines that the rate of change of the steering wheel angle and vehicles speed are sufficient to potentially cause wheel lift, it then applies the brake of the appropriate wheel and may also reduce engine power to lessen the chance that wheel lift...
Page 142: Esp (Electronic Stability Program)
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ESP (Electronic Stability Program) This system enhances directional control and stability of the vehicle under various driving conditions. ESP cor- rects for oversteering or understeering of the vehicle by applying the brake of the appropriate wheel to assist in counteracting the oversteer or understeer condition.
Page 143 WARNING! ESP (Electronic Stability Program) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. ESP cannot prevent accidents, in- cluding those resulting from excessive speed in turns, driving on very slippery surfaces, or hydro- planing.
Page 144 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE or gravel conditions and more wheel spin than ESP would normally allow is required to gain traction. To turn ESP on again, momentarily depress the ESP OFF” switch. This will restore the normal “ESP On” mode of operation.
Page 145 In this mode, ESP and TCS, except for the “limited slip” feature described in the TCS section, are turned off until the vehicle reaches a speed of 40 mph (64 km/h). At 40 mph (64 km/h) the system returns to “Partial Off” mode, described above.
Page 146: Tsc (Trailer Sway Control)
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE a speed of 40 mph (64 km/h). At 40 mph (64 km/h), the normal ESP stability function returns but TCS remains off. When the vehicle speed drops below 35 mph (56 km/h), the ESP system shuts off. ESP is deactivated at low vehicle speeds in 4WD low range so that it will not interfere with off-road driving but ESP function returns to provide the stability feature at speeds above 40 mph...
Page 147: Hsa (Hill Start Assist) (4Wd Models With Nv245
swaying. Always use caution when towing a trailer and follow the tongue weight recommendations. Refer to “Trailer Towing” in Section 5 of this manual for more information on towing a trailer with your vehicle. When TSC is functioning, the “ESP/TCS Indicator Light” will flash, the engine power may be reduced and you may feel the brakes being applied to individual wheels to attempt to stop the trailer from swaying.
Page 148 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Gear selection matches vehicle uphill direction (i.e., vehicle facing uphill is in forward gear; vehicle back- ing uphill is in R (Reverse) gear). HSA will work in R (Reverse) and all forward gears when the activation criteria have been met.
Page 149: Hdc (Hill Descent Control) (4Wd Models With
HSA Off If you wish to turn off the HSA system, it can be done using the Customer Programmable Features in the Elec- tronic Vehicle Information Center (EVIC). Refer to “Elec- tronic Vehicle Information Center (EVIC)” in Section 4 of this manual.
Page 150 150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE and will only activate when the vehicle is descending a hill. It will usually not activate on level ground. The HDC speed may be adjusted by the driver to suit the driving conditions. The speed corresponds to the trans- mission gear selected.
Page 151: Esp/Bas Warning Lamp And Esp/Tcs Indicator Light
WARNING! HDC is only intended to assist the driver in control- ling vehicle speed when descending hills. The driver must remain attentive to the driving conditions and is responsible for maintaining a safe vehicle speed. ESP/BAS Warning Lamp and ESP/TCS Indicator Light The malfunction indicator lamp for the ESP is combined with the BAS indicator.
Page 152: Rear Park Assist System- If Equipped
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR PARK ASSIST SYSTEM— IF EQUIPPED The Rear Park Assist System provides visual and audible indications of the distance between the rear fascia and the detected obstacle when backing up. Refer to the Warning Section and Note Section for limitations of this system and recommendations.
Page 153: Rear Park Assist Warning Display
Rear Park Assist Warning Display The Rear Park Assist Warning Display, located in the headliner near the flipper glass, provides both visual and audible warnings to indicate the distance between the rear fascia and the detected obstacle. Rear Park Assist Display UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 When the ignition is changed to the RUN/ON position, the warning display will turn ON all of its LEDs for...
Page 154 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING DISPLAY DISTANCES DISPLAY LED OBSTACLE DISTANCE FROM: REAR CORNERS 1st LED 2nd LED 3rd LED 4th LED 31.5 in. (80 cm) 5th LED 25.5 in. (65 cm) 6th LED 20 in. (50 cm) 7th LED 16 in.
Page 155: Enable/Disable The Rear Park Assist System
NOTE: The Rear Park Assist system will MUTE the radio, if on, when the system is sounding an audio tone. Enable/Disable the Rear Park Assist System The Rear Park Assist System can be enabled and disabled with a switch located on the upper switch bank of the instrument panel.
Page 156: Cleaning The Rear Park Assist System
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cleaning the Rear Park Assist System Clean the Rear Park Assist Sensors with water, car wash soap and a soft cloth. Do not use rough or hard cloths. Do not scratch or poke the sensors. Otherwise, you could damage the sensors.
Page 157: Turning The Rear Camera Off
2. Select “ON” at the “Rear Camera” screen. Highlight “DONE” and press ENTER. The rear camera is now enabled. 3. When the vehicle is shifted into R (Reverse), the CAUTION screen will appear, followed by an image of the rear of the vehicle. 4.
Page 158: Courtesy/Reading Lights
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Courtesy/Reading Lights At the forward end of the console are two courtesy/ reading lights. Press the lens to turn these lights on. Press a second time to turn the lights off. The lights also turn on when a front door or rear door is opened.
Page 159 WARNING! Your motorized door or gate will open and close while you are training the Universal Transceiver. Do not train the transceiver if people or pets are in the path of the door or gate. Only use this transceiver with a garage door opener that has a “stop and reverse”...
Page 160: Programming Homelink
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming HomeLink Before You Begin If you have not trained any of the HomeLink buttons, erase all channels before you begin training. To do this, press and hold the two outside buttons for 20 seconds.
Page 161 NOTE: Some gate operators and garage door openers may require you to replace Step #3 with procedures noted in the “Gate Operator/Canadian Programming” section. 4. Press and hold the just-trained HomeLink button. If the channel has been trained, the EVIC display will now state “CHANNEL # TRANSMIT.”...
Page 162: Gate Operator/Canadian Programming
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Firmly press and release the “learn” or “training” button. The name and color of the button may vary by manufacturer. NOTE: There are 30 seconds in which to initiate the next step after the “Learn” button has been pressed. 7.
Page 163: Using Homelink
If you unplugged the device for training, plug it back in at this time. Then proceed with Step 4 under “Programming HomeLink.” earlier in this section. Using HomeLink To operate, simply press and release the programmed HomeLink button. Activation will now occur for the trained device (i.e.
Page 164: Troubleshooting Tips
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Troubleshooting Tips If you are having trouble programming HomeLink , here are some of the most common solutions: • Replace the battery in the original transmitter. • Press the Learn Button on the Garage Door Opener to complete the training for Rolling Code.
Page 165: Power Sunroof - If Equipped
POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. Power Sunroof Switch UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 WARNING! • Never leave children in a vehicle, with the keys in the ignition switch.
Page 166: Opening Sunroof - Express
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof - Express Press the switch rearward and release, and the sunroof will open automatically from any position. The sunroof will open fully, then stop automatically. This is called Express Open. During Express Open operation, any movement of the sunroof switch will stop the sunroof.
Page 167: Sunshade Operation
Sunshade Operation The sunshade can be opened manually. However, the sunshade will open automatically as the sunroof opens. NOTE: The sunshade cannot be closed if the sunroof is open. Wind Buffeting Wind buffeting can be described as the perception of pressure on the ears or a helicopter type sound in the ears.
Page 168: Power Outlets
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER OUTLETS Front Power Outlet To the left and right of the convenience tray (lower center of instrument panel) is an outlet for electrically powered accessories. Pull lightly on the tab of the plastic cover to access the outlet.
Page 169: Power Inverter - If Equipped
CAUTION! Electrical Outlet Use With Engine Off • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting.
Page 170 170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the power inverter switch (located on the upper switch bank) to turn the power on to the outlet. Press the switch again to turn the power off. Power Inverter Switch NOTE: When the power inverter switch is pressed, there will be a delay of approximately 1 second before the inverter status indicator turns ON.
Page 171: Cup Holders
CUP HOLDERS In the center console there are two cup holders for the front seat passengers. Front Cup Holders NOTE: The cup holder insert is removable, from the console, for cleaning. It can be reinstalled with the larger UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 cup depression towards the passenger seat, but the top surface will not be flush with the console surface.
Page 172: Cargo Area Features
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CARGO AREA FEATURES Cargo Light The cargo area light is activated by opening the liftgate, opening any door, or by rotating the dimmer control on the multi-function control lever to the extreme top posi- tion.
Page 173: Retractable Cargo Area Cover - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 Retractable Cargo Area Cover — If Equipped NOTE: The purpose of this cover is for privacy, not to secure loads. It will not prevent cargo from shifting or protect passengers from loose cargo. To cover the cargo area: 1.
Page 174: Cargo Tie-Down Hooks
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! In an accident a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compart- ment.
Page 175 WARNING! Cargo tie-down hooks are not safe anchors for a child seat tether strap. In a sudden stop or collision a hook could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers.
Page 176: Cargo Load Floor
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To help protect against personal injury, passengers should not be seated in the rear cargo area. The rear cargo space is intended for load carrying purposes only, not for passengers, who should sit in seats and use seat belts.
Page 177: Rear Window Features
1. Flip up pull loop(s) so they are perpendicular (straight up) to the top surface of the tray. 2. Pull up on loop(s) and twist 90 degrees, so they are parallel to the slotted hole in tray. 3. Lift tray over loop(s), and reposition tray. 4.
Page 178: Rear Window Defroster - If Equipped
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the liftgate flipper glass is open, connection to the rear window wiper is interrupted preventing activation of the rear wiper blade. When the liftgate flipper glass is closed, the rear wiper switch or the ignition switch needs to be turned OFF and ON to restart the rear wiper.
Page 179: Roof Luggage Rack - If Equipped
ROOF LUGGAGE RACK — IF EQUIPPED External racks do not increase the total load carrying capacity of the vehicle. Be sure that the total occupant and luggage load inside the vehicle, plus the load on the luggage rack, do not exceed the rated vehicle capacity. This vehicle is not equipped with roof rack cross rails as built, unless ordered as optional equipment.
Page 180 180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • To prevent damage to the roof of your vehicle, DO NOT carry any loads on the roof rack without cross rails installed. The load should be secured and placed on top of the cross rails, not directly on the roof.
Page 181: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panel And Controls ... . . 185 Instrument Cluster ..... . 186 Gasoline Engine .
Page 182 182 UNDERSTANDING YOUR INSTRUMENT PANEL AM Reception ..... . . 212 FM Reception ......213 Sales Code REQ —...
Page 183 Operating Instructions — Satellite Radio ..244 Clock Setting Procedure ....244 Universal Consumer Interface (UCI) — If Equipped ......246 Connecting The iPod .
Page 184 184 UNDERSTANDING YOUR INSTRUMENT PANEL Climate Controls ..... . . 258 Manual Air Conditioning And Heating System — If Equipped ......258 Automatic Temperature Control —...
Page 185: Instrument Panel And Controls
INSTRUMENT PANEL AND CONTROLS 1 — Air Outlet 2 — Instrument Cluster 3 — Radio 4 — Glove Box UNDERSTANDING YOUR INSTRUMENT PANEL 185 5 — Upper Switch Bank 6 — Power Outlet/Cigar Lighter 7 — Storage Bin 8 — Power Outlet 9 —...
Page 186: Instrument Cluster
186 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER Gasoline Engine...
Page 187: Diesel Engine
UNDERSTANDING YOUR INSTRUMENT PANEL 187 Diesel Engine...
Page 188: Instrument Cluster Description
188 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTION 1. Speedometer Indicates vehicle speed. 2. Brake Warning Light The BRAKE warning light will come on when the ignition is first turned on, and stay on briefly as a bulb check. If the bulb does not come on during starting, have the bulb re- paired promptly.
Page 189 before engine start. If the bulb does not come on when turning the key from OFF to ON, have the condition checked promptly. Certain conditions such as a loose or missing gas cap, poor fuel quality, etc. may illuminate the light after engine start.
Page 190 190 UNDERSTANDING YOUR INSTRUMENT PANEL 8. Tachometer The red segments indicate the maximum permissible engine revolutions-per-minute (r.p.m. x 1000) for each gear range. Before reaching the red area, ease up on the accelerator. 9. Security Alarm System Indicator Light — If Equipped This light will flash rapidly for approximately 15 seconds when the vehicle theft alarm is arming.
Page 191 12. Tire Pressure Monitoring Telltale Light Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those...
Page 192 192 UNDERSTANDING YOUR INSTRUMENT PANEL of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replace- ment or alternate tires and wheels allow the TPMS to continue to function properly.
Page 193 The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather, up mountain grades, or when towing a trailer. It should not be allowed to exceed the upper limits of the normal operating range. CAUTION! Driving with a hot engine cooling system could damage your vehicle.
Page 194 194 UNDERSTANDING YOUR INSTRUMENT PANEL 16. Electronic Stability Program (ESP) Warning Light/Brake Assist System (BAS) Warning Light The ESP/BAS warning light in the instrument cluster comes on when the ignition switch is turned to the “ON” position. The light should go out with the engine running.
Page 195 U.S. federal regulations require that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven. There- fore, if the odometer reading is changed during repair or replacement, be sure to keep a record of the reading before and after the service so that the correct mileage can be determined.
Page 196: Electronic Vehicle Information Center (Evic)
196 UNDERSTANDING YOUR INSTRUMENT PANEL engine is started. If the light stays on or turns on while driving, it indicates a problem with the charging system. Immediate service should be obtained. 26. Low Fuel Warning Light This light will turn on and a single chime will sound when the fuel level drops to 1/8 tank.
Page 197 • Vehicle Information Warning Message Displays • Personal Settings (Customer Programmable Features) • Compass Display • Outside Temperature Display • Trip Computer Functions The system allows the driver to select information by pressing the following buttons mounted on the steering wheel: MENU Button Press and release the MENU button and the...
Page 198: Electronic Vehicle Information Center (Evic) Displays
198 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Vehicle Information Center (EVIC) Displays When the appropriate conditions exist, the Electronic Vehicle Information Center (EVIC) displays the following messages: • TURN SIGNAL ON • PERFORM SERVICE • KEY NOT PROGRAMMED — DAMAGED KEY •...
Page 199 • HOOD/GATE/DOOR OPEN (with graphic) • HOOD/GATE/DOORS OPEN (with graphic) • LIFTGLASS/DOOR OPEN (with graphic) • LIFTGLASS/DOORS OPEN (with graphic) • LIFTGLASS/HOOD OPEN (with graphic) • WASHER FLUID LOW (with graphic) • COOLANT LOW (with graphic) • OIL CHANGE REQUIRED •...
Page 200 200 UNDERSTANDING YOUR INSTRUMENT PANEL • MEMORY #2 POSITIONS SET • MEMORY SYSTEM DISABLED — SEATBELT BUCK- LED (with graphic) • MEMORY SYSTEM DISABLED — VEHICLE NOT IN PARK • DRIVER 1 MEMORY • DRIVER 2 MEMORY • ADJ. PEDALS DISABLED — CRUISE CONTROL SET •...
Page 201: Engine Oil Change Indicator System
Engine Oil Change Indicator System Oil Change Required (Gasoline Engines Only) Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will flash in the EVIC display for approximately 10 seconds after a single chime has sounded to indicate the next scheduled oil change interval.
Page 202 202 UNDERSTANDING YOUR INSTRUMENT PANEL • Service Distance • Display Units of Measure in Press the SCROLL button to cycle through all the Trip Computer functions. The Trip Functions mode displays the following informa- tion: • Average Fuel Economy / Fuel Saver Mode (5.7L Engine Only) Shows the average fuel economy since the last reset.
Page 203 This feature allows you to monitor when the MDS switches off the fuel on four of the eight cylinders and it can be used to modify driving habits in order to increase the time in which the fuel saver mode is active. 8 Cylinder Operation - MDS Off UNDERSTANDING YOUR INSTRUMENT PANEL 203 •...
Page 204: Compass Display
204 UNDERSTANDING YOUR INSTRUMENT PANEL • Trip A Shows the total distance traveled for trip A since the last reset. • Trip B Shows the total distance traveled for trip B since the last reset. • Elapsed Time Shows the total elapsed time of travel since the last reset when the ignition switch is in the ACC position.
Page 205 objects) until the “CAL” indicator displayed in the EVIC turns off. The compass will now function normally. Manual Compass Calibration If the compass appears erratic and the “CAL” indicator does not appear in the EVIC display, you must put the compass into the Calibration Mode manually as follows: 1.
Page 206: Personal Settings (Customer Programmable Features)
206 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Turn the ignition switch ON. 2. Press and hold the compass button for approximately 2 seconds. 3. Press the SCROLL button until “Compass Variance” message and the last variance zone number displays in the EVIC. 4.
Page 207 Use the SCROLL button to display one of the following choices: Language When in this display you may select one of three lan- guages for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the FUNCTION SELECT button while in this display to select English, Espanol, or Francais.
Page 208 208 UNDERSTANDING YOUR INSTRUMENT PANEL unlock button. To make your selection, press and release the FUNCTION SELECT button until “Driver Door 1st Press” or “All Doors 1st Press” appears. Sound Horn with Lock When Y (YES) is selected, a short horn sound will occur when the remote keyless entry “Lock”...
Page 209 Headlights On with Wipers (Available with Auto Headlights Only) When Y (YES) is selected, and the headlight switch is in the AUTO position, the headlights will turn on approxi- mately 10 seconds after the wipers are turned on. The headlights will also turn off when the wipers are turned off if they were turned on by this feature.
Page 210 210 UNDERSTANDING YOUR INSTRUMENT PANEL Easy Entry/Exit Seat (Available with Memory Seat Only) This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. To make your selection, press and release the FUNCTION SELECT button until “Y (YES)” or “N (NO)” appears.
Page 211: System Status
units of measure. To make your selection, press and release the FUNCTION SELECT button until “US” or “METRIC” appears. System Status Press and release the MENU button until one of the following System Status messages displays in the EVIC: • System OK •...
Page 212: Radio General Information
212 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Your system can be set to display pressure units in PSI, kPa, or BAR. RADIO GENERAL INFORMATION Radio Broadcast Signals Your new radio will provide excellent reception under most operating conditions. Like any system, however, car radios have performance limitations, due to mobile op- eration and natural phenomena, which might lead you to believe your sound system is malfunctioning.
Page 213: Fm Reception
FM Reception Because FM transmission is based on frequency varia- tions, interference that consists of amplitude variations can be filtered out, leaving the reception relatively clear, which is the major feature of FM radio. NOTE: The radio, steering wheel radio controls (if equipped), and 6 disc CD/DVD changer (if equipped) will remain active for up to 10 minutes after the ignition switch has been turned off.
Page 214 214 UNDERSTANDING YOUR INSTRUMENT PANEL Power Switch/Volume Control (Rotary) Press the ON/VOL control to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping. Turning the volume control to the right increases the volume and to the left decreases it.
Page 215 Phone Button (UConnect™ Hands Free Phone) — If Equipped Press this button to operate the Hand Free Phone (UCon- nect™) feature (if equipped). Refer to “Hands-Free Com- munication (UConnect™)” in Section 3 for more informa- tion. If your vehicle is not equipped with or this feature is not available on your vehicle, a “UConnect™...
Page 216 216 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF (Radio Mode) Pressing the rewind or fast forward button causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM, FM or Satellite (if equipped) frequencies. TUNE Control (Radio Mode) Turn the right side rotary control clockwise to increase or counter-clockwise to decrease the frequency.
Page 217 Toggle the Music Type button to select the following format types: 16 Digit-Character Program Type No program type or un- defined Adult Hits Classical Classic Rock College Country Foreign Language Information Jazz News Nostalgia Oldies UNDERSTANDING YOUR INSTRUMENT PANEL 217 Program Type Personality Display...
Page 218 218 UNDERSTANDING YOUR INSTRUMENT PANEL station with the same selected Music Type name. The Music Type function only operates when in the FM mode. If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset station.
Page 219 NOTE: These selections can only be made while playing a DVD. • VES Power - Allows you to turn VES ON and OFF (If Equipped). • VES Lock - Locks out rear VES remote controls (If Equipped). • VES CH1/CH2 - Allows the user to change mode of either the IR1 or IR2, wireless headphones, by pressing the Audio/Select button (If Equipped).
Page 220 220 UNDERSTANDING YOUR INSTRUMENT PANEL Subtitle Language — If Equipped Selecting this item will allow the user to choose a default subtitle language (effective only if language supported by disc). If customer wishes to select a language not listed, then scroll down and select other. Enter the country code using the TUNE control knob to scroll up and down to select the # and then push to select.
Page 221: Operation Instructions - (Disc Mode For Cd And Mp3/Wma Audio Play, Dvd-Video)
SET Button (Radio Mode) — To Set the Push-Button Memory When you are receiving a station that you wish to commit to push-button memory, press the SET button. The symbol SET 1 will now show in the display window. Select the button (1-6) you wish to lock onto this station and press and release that button.
Page 222 222 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! The radio may shut down during extremely hot conditions. When this occurs, the radio will indicate “Disc Hot” and shut off until a safe temperature is reached. This shutdown is necessary to protect the optics of the DVD player and other radio internal components.
Page 223: Notes On Playing Mp3/Wma Files
Press and hold the eject button for 5 seconds and all CDs will be ejected from the radio. The disc can be ejected with the radio and ignition OFF. SEEK Button (CD MODE) Press the right SEEK button for the next selection on the CD.
Page 224 224 UNDERSTANDING YOUR INSTRUMENT PANEL Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor- mally.
Page 225 frequencies in the following table are supported. In addition, variable bit rates (VBR) are also supported. The majority of MP3/WMA files use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or VBR bit rates. MPEG Sampling Fre- Specification quency (kHz) MPEG-1 Audio...
Page 226: List Button
226 UNDERSTANDING YOUR INSTRUMENT PANEL To increase the speed of disc loading, it is recommended to use CD-R media and single-session discs. To create a single-session disc, enable the Disc at Once option before writing to the disc. LIST Button (DISC Mode for MP3/WMA Play) Pressing the LIST button will bring up a list of all folders on the disc.
Page 227 not loud enough, turn the device’s volume up. If the AUX audio sounds distorted, turn the device’s volume down. SEEK Button (Auxiliary Mode) No function. SCAN Button (Auxiliary Mode) No function. EJECT Button (Auxiliary Mode) No function. TIME Button (Auxiliary Mode) Press this button to change the display from elapsed playing time to time of day.
Page 228: Sales Code Res - Am/Fm Stereo Radio With Cd Player (Mp3 Aux Jack)
228 UNDERSTANDING YOUR INSTRUMENT PANEL Macrovision This product incorporates copyright protection technol- ogy that is protected by U.S. patents and other intellec- tual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.
Page 229 Power Switch/Volume Control (Rotary) Press the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio. Electronic Volume Control The electronic volume control turns continuously (360 degrees) in either direction without stopping. Turning the ON/VOLUME control knob to the right increases the volume and to the left decreases it.
Page 230 230 UNDERSTANDING YOUR INSTRUMENT PANEL Phone Button (UConnect™ Hands Free Phone) — If Equipped Press this button to operate the Hand Free Phone (UCon- nect™) feature (if equipped). Refer to “Hands-Free Com- munication (UConnect™)” in Section 3 for more informa- tion.
Page 231 RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM or FM frequencies. TUNE Control Turn the right side rotary control clockwise to increase or counter-clockwise to decrease the frequency.
Page 232 232 UNDERSTANDING YOUR INSTRUMENT PANEL program format type to be selected. Many radio stations do not currently broadcast Music Type information. Toggle the Music Type button to select the following format types: Program Type No program type or un- defined Adult Hits Classical Classic Rock...
Page 233 By pressing the SEEK button when the Music Type icon is displayed, the radio will be tuned to the next frequency station with the same selected Music Type name. The Music Type function only operates when in the FM mode. If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be exited and the radio will tune to the preset station.
Page 234: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
234 UNDERSTANDING YOUR INSTRUMENT PANEL both AM and FM. This allows a total of 12 AM and 12 FM stations to be stored into push-button memory. The stations stored in SET 2 memory can be selected by pressing the push-button twice. Every time a preset button is used, a corresponding button number will display.
Page 235 begin to play when you insert the disc. The display will show the disc number, the track number, and index time in minutes and seconds. Play will begin at the start of track 1. CAUTION! • This CD player will accept 4 3/4 inch (12 cm) discs only.
Page 236: Notes On Playing Mp3 Files
236 UNDERSTANDING YOUR INSTRUMENT PANEL the current selection. Pressing and holding the SEEK button will allow to scroll through tracks faster in CD, MP3 modes. SCAN Button Press the Scan button to scan through each track on the CD currently playing. TIME Button Press this button to change the display from a large CD playing time display to a small CD playing time display.
Page 237 Supported Media (Disc Types) The MP3 file recording media supported by the radio are CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 Level 1 and Level 2 and includes the Joliet extension. When reading discs recorded using formats other than ISO 9660 Level 1 and Level 2, the radio may fail to read files properly and may be unable to play the file nor-...
Page 238 238 UNDERSTANDING YOUR INSTRUMENT PANEL Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
Page 239: List Button (Cd Mode For Mp3 Play)
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be affected by the following: •...
Page 240 240 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the INFO button again for 3 seconds to return to elapsed time display. Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device such as an MP3 player, or cassette player, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers.
Page 241: Sales Code Ren - Multimedia System - If Equipped
SALES CODE REN — MULTIMEDIA SYSTEM — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The REN multimedia system contains a radio, CD/DVD player, USB port, a 20 gigabyte Hard Drive (HDD), and a “JukeBox”...
Page 242: Operating Instructions - Hands-Free
242 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Hands-Free Communication (UConnect™) (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in Section 3 of this manual for detailed operating instruc- tions. Clock Setting Procedure Setting the Clock 1. Turn on the system. 2.
Page 243 3. When this feature is on, a check mark will appear in the box next to the words “Daylight Savings.” Touch the screen where the words “Daylight Savings” are dis- played to change the current setting. Show Time if Radio is Off When selected, this feature will display the time of day on the touch screen when the system is turned off.
Page 244: Sales Code Rer - Am/Fm/Cd/Dvd Radio With Navigation System - If Equipped
244 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE RER — AM/FM/CD/DVD RADIO WITH NAVIGATION SYSTEM — IF EQUIPPED NOTE: The radio sales code is located on the lower right side of your radio faceplate. Satellite Navigation Radio with CD Player with MP3 Capability (RER) - combines a Global-Positioning System-based navigation system with an integrated color screen to provide maps, turn identification, selection...
Page 245 4. Press the HOUR or MIN soft keys on the face of the radio. 5. The time setting will change each time you press the HOUR or MIN soft key. 6. Press the SAVE soft key on the face of the radio. Changing the Time Zone 1.
Page 246: Universal Consumer Interface (Uci) - If Equipped
246 UNDERSTANDING YOUR INSTRUMENT PANEL UNIVERSAL CONSUMER INTERFACE (UCI) — IF EQUIPPED NOTE: This section is for sales code RES and REQ radios only with UConnect.™ For sales code REN touch screen radio, refer to the separate User’s Manual. This feature allows you to plug in an iPod into the vehicle’s sound system through a connector (UCI connec- tor) using an optional connection cable (available through Mopar ).
Page 247: Play Mode
Play Mode When switched to UCI mode the iPod will be in Play mode. In this Play mode , you may use the following buttons on the radio faceplate to control the iPod and display data: TUNE/SCROLL Knob Use the “TUNE/SCROLL” knob to go to the next or previous track.
Page 248 248 UNDERSTANDING YOUR INSTRUMENT PANEL previous track in the list, if you press this button at any other time in the current track it will go back to the beginning of the track. If the right (up) button is pressed during Play mode, it will go to the next track in the list.
Page 249: List Or Browse Mode
List or Browse Mode During Play mode, pressing any of the following buttons will take you to List mode. List mode enables you to scroll through the list of menus and tracks on the iPod . TUNE/SCROLL Knob In the List mode, the “TUNE/SCROLL” knob functions in a similar manner as the scroll wheel on the iPod .
Page 250: Satellite Radio (Rsc) - If Equipped (Req And Res Radios Only)
250 UNDERSTANDING YOUR INSTRUMENT PANEL To exit the List mode without selecting a track, press the same preset button again to go back to Play mode. LIST Button Pressing the “LIST” button will take to the top level menu of the iPod . This takes you to the same top level menu as on your iPod .
Page 251: Electronic Serial Number/Sirius Identification Number (Ens/Sid)
further information, call the toll-free number 888-539- 7474, or visit the Sirius web site at www.sirius.com. Please have the following information available when calling: 1. The Electronic Serial Number/Sirius Identification Number (ESN/SID). 2. Your Vehicle Identification Number. Electronic Serial Number/Sirius Identification Number (ENS/SID) The Electronic Serial Number/Sirius Identification Num- ber is needed to activate your Sirius Satellite Radio...
Page 252: Reception Quality
252 UNDERSTANDING YOUR INSTRUMENT PANEL Reception Quality Satellite reception may be interrupted due to one of the following reasons: • The vehicle is parked in an underground parking structure or under a physical obstacle. • Dense tree coverage may interrupt reception in the form of short audio mutes.
Page 253 3 seconds will make the radio display the Song Title all of the time (press and hold again to return to normal display). RW/FF Pressing the RW (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next channel in the direction of the arrows.
Page 254: Operating Instructions - Hands Free Phone (If Equipped)
254 UNDERSTANDING YOUR INSTRUMENT PANEL Select the button (1-6) you wish to lock onto this channel and press and release that button. If a button is not selected within 5 seconds after pressing the SET button, the channel will continue to play but will not be stored into push-button memory.
Page 255 UNDERSTANDING YOUR INSTRUMENT PANEL 255 Lowering the DVD Screen Remote Control Location...
Page 256: Remote Sound System Controls - If Equipped
256 UNDERSTANDING YOUR INSTRUMENT PANEL REMOTE SOUND SYSTEM CONTROLS — IF EQUIPPED The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right hand control is a rocker type switch with a push-button in the center and controls the volume and mode of the sound system.
Page 257: Cd Player
The button located in the center of the left hand control will tune to the next preset station that you have pro- grammed in the radio preset push-button. CD Player Pressing the top of the switch once will go to the next track on the CD.
Page 258: Radio Operation And Cellular Phones
258 UNDERSTANDING YOUR INSTRUMENT PANEL RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the cellular phone being On in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio.
Page 259 Blower Control The rotary knob on the left controls the blower and can be set in one of four speeds and OFF. The blower fan mo- tor will remain on until the system is turned to the OFF position or the ignition is turned OFF.
Page 260 260 UNDERSTANDING YOUR INSTRUMENT PANEL side window demister grilles. Some airflow is delivered to the floor while in defrost so that comfort can be maintained. Floor Air flows through the floor outlets located under the instrument panel and into the rear seating area through vents under the front seats.
Page 261 located on the control panel. Conditioned air will be directed through the outlets selected by the mode control. A light in the snowflake button shows that the air conditioning is on. Slight changes in engine speed or power may be noticed when the air conditioning compressor is on.
Page 262 262 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The numbers on the temperature dial represent a comfort setting when the Mode knob is set to Auto, and not the actual air temperature. Operation of the system is quite simple. Begin by turning the right mode knob to AUTO, and place the blower control (left knob) to either LO AUTO or HI AUTO.
Page 263 The system will automatically control recircu- lation. However, pressing this button will tem- porarily put the system in recirculation mode. This can be used when outside conditions such as smoke, odors, dust, or high humidity are present. This will cause the LED to illuminate. NOTE: •...
Page 264 264 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Operation This system offers a full complement of manual override features which consist of Blower Preferred Automatic, Mode Preferred Automatic with Manual Air Temperature Control and Manual. This means the customer can over- ride the blower, mode and disable automatic temperature control completely.
Page 265 UNDERSTANDING YOUR INSTRUMENT PANEL 265...
Page 266 266 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Regardless of the type of operation, when a temperature knob is set to the full clockwise or full counterclockwise position, the system will deliver full hot or full cold air out of the ducts, respectively. The operator can override the AUTO mode setting and select the direction of the air by rotating the right mode knob to one of the following positions.
Page 267 Air flows through the registers in the back of the center console, and under the front seats to the rear seat passengers. These registers can be closed to block airflow. The center console outlets deliver conditioned air while the floor outlets deliver heated air. •...
Page 268 268 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Tips Window Fogging Windows will fog on the inside when the humidity inside the vehicle is high. This often occurs in mild or cool temperatures when it’s rainy or humid. In most cases turning on the Air-conditioning (pressing the snowflake button) will clear the fog.
Page 269 Your air conditioning system is also equipped with an automatic recirculation system. When the system senses a heavy load or high heat conditions, it may use partial Recirculation A/C mode to provide additional comfort. Winter Operation When operating the system during the winter months, make sure the air intake, located directly in front of the windshield, is free of ice, slush, snow, or other obstruc- tions.
Page 270 270 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Tips Chart...
Page 271 STARTING AND OPERATING CONTENTS Starting Procedure ..... . 275 Normal Starting — Gasoline Engines ..276 Extremely Cold Weather (Below 29°C) .
Page 272 272 STARTING AND OPERATING Shift Positions ......295 Shifting Procedures ....296 Quadra-Drive II System —...
Page 273 Tire Spinning ......321 Tread Wear Indicators ....322 Life Of Tire .
Page 274 274 STARTING AND OPERATING Starting ......343 Cruising Range ..... . . 343 Replacement Parts .
Page 275: Starting Procedure
STARTING PROCEDURE Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. STARTING AND OPERATING 275 WARNING! • Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons.
Page 276: Normal Starting - Gasoline Engines
276 STARTING AND OPERATING Normal Starting — Gasoline Engines The gear selector must be in the “N” (Neutral) or “P” (Park) position before you can start the engine. Apply the brakes before shifting into any driving gear. NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or depressing the accelerator pedal.
Page 277: If Engine Fails To Start
If Engine Fails to Start WARNING! • Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle. This could result in a flash fire causing serious personal injury. • Do not attempt to push or tow your vehicle to get it started.
Page 278: After Starting
278 STARTING AND OPERATING After Starting The idle speed is controlled automatically and it will decrease as the engine warms up. Normal Starting — Diesel Engines Observe the following when the engine is operating. • All message center lights are off. •...
Page 279 NOTE: • Use of Climatized ULSD Diesel Fuel or Number 1 ULSD Diesel Fuel results in a noticeable decrease in fuel economy. • Climatized ULSD Diesel Fuel is a blend of Number 2 ULSD and Number 1 ULSD Diesel Fuels which re- duces the temperature at which wax crystals form in fuel.
Page 280 280 STARTING AND OPERATING depending on engine temperature. When the “Glow Plug Indicator Light” goes out, the engine is ready to start. 4. Tip Start Feature Do not press the accelerator. Use the Fob with Integrated Key to briefly turn the ignition switch to the START position and then release it.
Page 281 If temperatures are below 32°F (0°C), operate the engine at moderate speeds for 5 minutes before full loads are applied. Engine Idling - In Cold Weather Avoid prolonged idling in ambient temperatures below 0°F (-18°C). Long periods of idling may be harmful to your engine because combustion chamber temperatures can drop so low that the fuel may not burn completely.
Page 282 282 STARTING AND OPERATING Driving Conditions Stop & Go Stop & Go Highway Speeds City Traffic Highway Speeds Uphill Grade TURBOCHARGER COOL DOWN CHART Load Turbocharger Temperature Empty Medium Medium Max. GCWR Max. GCWR Max. GCWR Idle Time (in minutes) Before Shut Down Cool Less than 1...
Page 283: Engine Block Heater - If Equipped
ENGINE BLOCK HEATER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather. Connect the heater cord to a ground-fault interrupter protected 110-115 volt AC electrical outlet with a grounded, three-wire exten- sion cord. Use the heater when temperatures below 0°F (-18°C) are expected to last for several days.
Page 284: Automatic Transmission
284 STARTING AND OPERATING AUTOMATIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P (Park) only after the vehicle has come to a complete stop. • Shift into or out of R (Reverse) only after the vehicle has come to a complete stop and the engine is at idle speed.
Page 285: Brake/Transmission Interlock System
1. Firmly set the parking brake. 2. Using a flat blade screwdriver, carefully remove the shift lock manual override cover which is located on the PRNDL bezel. 3. Depress and maintain firm pressure on the brake pedal. 4. Using the screwdriver, reach into the manual override opening.
Page 286: Gear Ranges
286 STARTING AND OPERATING vehicle, may be somewhat abrupt. This is a normal condition, and precision shifts will develop within a few hundred miles. Gear Ranges NOTE: After selecting any gear range, wait a moment to allow the selected gear to engage before accelerating. This is especially important when the engine is cold.
Page 287 R (Reverse) Use this range only after the vehicle has come to a complete stop. N (Neutral) Shift into N (Neutral) when the vehicle is standing for prolonged periods with the engine running. The engine may be started in this range. Set the parking brake if you must leave the vehicle.
Page 288 288 STARTING AND OPERATING If you are in D (Drive) and are in 5th gear, the first tap to the left (-) will display 5. Another tap to the left (-) will shift the transmission into 4th gear. On vehicles equipped with 4.7L or 5.7L engines, use of ERS (or Tow/Haul mode) also enables a additional underdrive gear which is not normally used during through-gear accelerations.
Page 289 • the transmission selector is in D (Drive); • the engine coolant has reached normal operating tem- perature; • vehicle speed is above approximately 30 mph (48 km/h); • the “TOW/HAUL” switch has not been activated; • transmission has reached normal operating tempera- ture.
Page 290 290 STARTING AND OPERATING The transmission will downshift from Overdrive to the most desirable gear if the accelerator pedal is fully depressed at vehicle speeds above approximately 35 mph (56 km/h). When To Use “TOW/HAUL” Mode — If Equipped When driving in hilly areas, towing a trailer, carrying a heavy load, etc., and frequent transmission shifting oc- curs, press the “TOW/HAUL”...
Page 291 Transmission Limp Home Mode Transmission function is monitored for abnormal condi- tions. If a condition is detected that could result in transmission damage, the transmission limp home mode will be engaged. In this mode, the transmission will remain in the current gear (3.7L engine) or in direct gear (4.7L and 5.7L engines) until the vehicle is brought to a stop.
Page 292: Rocking The Vehicle
292 STARTING AND OPERATING NOTE: The torque converter clutch will not engage until the transmission fluid and engine coolant are warm [usually after 1-3 miles (1.6 - 4.8 km) of driving]. Because the engine speed is higher when the torque converter clutch is not engaged, it may seem as if the transmission is not shifting into Overdrive when cold.
Page 293: Four-Wheel Drive Operation
five rocking-motion cycles. This will minimize overheat- ing and reduce the risk of transmission failure during prolonged efforts to free a stuck vehicle. CAUTION! When “rocking” a stuck vehicle by moving between “First” and R (Reverse), do not spin the wheels faster than 15 mph (24 km/h), or drivetrain damage may result.
Page 294 294 STARTING AND OPERATING percent of engine torque to the rear axle. When speed differences are increased between the front and rear drive shafts, the transfer case can transmit up to 100 percent of available engine torque to the front or rear drive shafts. When additional traction is required, the 4 LOW position can be used to lock the front and rear driveshafts together and force the front and rear wheels to rotate at the same...
Page 295: Shift Positions
WARNING! You or others could be injured if you leave the vehicle unattended with the transfer case in the N (Neutral) position without first fully engaging the parking brake. The transfer case N (Neutral) position disengages both the front and rear driveshafts from the powertrain and will allow the vehicle to move regardless of the transmission position.
Page 296: Shifting Procedures
296 STARTING AND OPERATING Shifting Procedures 4 HI to 4 LOW With the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), key ON or engine running, shift the transmission into N (Neutral), and raise the transfer case T-handle. “The 4WD LOW Indicator Lamp”...
Page 297 4 LOW to 4 HI With the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), key ON or engine running, shift the transmission into N (Neutral), and raise the transfer case T-handle. The “4WD LOW Indicator Lamp” in the instrument cluster will flash and go out when the shift is complete.
Page 298 298 STARTING AND OPERATING 4. Hold down N (Neutral) “pin” switch (with a pen, etc.) for 4 seconds until the LED lamp by the switch starts to blink indicating shift in progress. Lamp will stop blinking (stay on solid) when Neutral shift is complete. A “4WD SYSTEM IN NEUTRAL”...
Page 299: Quadra-Drive Ii System - If Equipped
Quadra-Drive II System — If Equipped The optional Quadra-Drive II System features three torque transfer couplings. The couplings include ELSD (Electronic Limited Slip Differential) front and rear axles and Quadra-Trac II transfer case. The optional ELSD axles are fully automatic and require no driver input to operate.
Page 300: Off-Road Driving Tips
300 STARTING AND OPERATING OFF-ROAD DRIVING TIPS NOTE: Prior to off-road driving, remove the front air dam to prevent damage. The front air dam is attached to the lower front fascia with quarter turn fasteners, and can be removed by hand. When To Use 4WD LOW Range —...
Page 301: Driving In Snow, Mud And Sand
and/or the flow rate is reduced. If you must cross flowing water avoid depths in excess of 9 inches. The flowing water can erode the streambed causing your vehicle to sink into deeper water. Determine exit point(s) that are downstream of your entry point to allow for drifting.
Page 302: Traction Downhill
302 STARTING AND OPERATING If you stall or begin to lose forward motion while climbing a steep hill, allow your vehicle to come to a stop and immediately apply the brakes. Restart the engine and shift to R (Reverse). Back slowly down the hill allowing the compression braking of the engine to help regulate your speed.
Page 303: After Driving Off-Road
After Driving Off-Road Off-road operation puts more stress on your vehicle than does most on-road driving. After going off-road it is always a good idea to check for damage. That way you can get any problems taken care of right away and have your vehicle ready when you need it.
Page 304: Parking Brake
304 STARTING AND OPERATING PARKING BRAKE To set the parking brake, pull the lever up as firmly as possible. When the parking brake is applied with the ignition ON, the “Brake Warning Light” in the instru- ment cluster will light. To release the parking brake, pull up slightly, press the center button, then lower the lever completely.
Page 305: Anti-Lock Brake System
WARNING! • Always fully apply the parking brake when leav- ing your vehicle, or it may roll and cause damage or injury. Also, be certain to leave the transmission in P (Park). Failure to do so may allow the vehicle to roll and cause damage or injury.
Page 306 306 STARTING AND OPERATING WARNING! Significant over or under inflation of tires or mixing sizes of tires or wheels on the vehicle can lead to loss of braking effectiveness. The Anti-Lock Brake System conducts a low-speed self- test at about 12 mph (20 km/h). If you have your foot lightly on the brake while this test is occurring, you may feel slight pedal movement.
Page 307 WARNING! • The Anti-Lock Brake System (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded.
Page 308: Power Steering
308 STARTING AND OPERATING • Do not “ride” the brakes by resting your foot on the pedal. This could overheat the brakes and result in unpredictable braking action, longer stopping dis- tances, or brake damage. • When descending mountains or hills, repeated brak- ing can cause brake fade with loss of braking control.
Page 309: Multi Displacement System (Mds) - 5.7L Engine
NOTE: Increased noise levels at the end of the steering wheel travel are considered normal and do not indicate that there is a problem with the power steering system. Upon initial start-up in cold weather, the power steering pump may make noise for a short amount of time. This is due to the cold, thick fluid in the steering system.
Page 310: Tire Safety Information
310 STARTING AND OPERATING TIRE SAFETY INFORMATION Tire Markings NOTE: • P (Passenger)-Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tire sizing is based on European design standards.
Page 311 Tire Sizing Chart Size Designation: P = Passenger car tire size based on U.S. design standards ...blank... = Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Millimeters (mm) 65 = Aspect Ratio in Percent (%)
Page 312 312 STARTING AND OPERATING Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions.
Page 313: Tire Identification Number (Tin)
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN including date code DOT = Department of Transportation —This symbol certifies that the tire is in compliance with the U.S.
Page 314: Tire Loading And Tire Pressure
314 STARTING AND OPERATING Tire Loading and Tire Pressure Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar. Tire Placard Location Tire and Loading Information Placard Tire and Loading Information This placard tells you important information about the: 1) number of people that can be carried in the vehicle...
Page 315 Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the “Tire and Loading Information”...
Page 316 316 STARTING AND OPERATING 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle.
Page 317 STARTING AND OPERATING 317...
Page 318: Tires - General Information
318 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMATION Tire Pressure Proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle.
Page 319: Tire Inflation Pressures
2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Under inflation also increases tire rolling resistance and results in higher fuel consump- tion.
Page 320 320 STARTING AND OPERATING check tire pressure. Do not make a visual judgement when determining proper inflation. Radial tires may look properly inflated even when they are under inflated. CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped). This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem.
Page 321: Tire Pressures For High Speed Operation
Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important.
Page 322: Tread Wear Indicators
322 STARTING AND OPERATING WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck, and do not let anyone near a spinning wheel no matter what the speed.
Page 323: Life Of Tire
Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • Tire pressure • Distance driven WARNING! Tires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure.
Page 324: Alignment And Balance
324 STARTING AND OPERATING WARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combina- tions of unapproved tires and wheels may change suspension dimensions and performance charac- teristics, resulting in changes to steering, han- dling, and braking of your vehicle.
Page 325: Tire Chains
Improper alignment will not cause vehicle vibration. Vibration may be a result of tire and wheel out-of- balance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear. TIRE CHAINS Certain models have sufficient tire-to-body clearance to allow use of tire chains. Install chains on rear tires only. Follow these recommendations to guard against damage and excessive tire and chain wear: •...
Page 326: Tire Pressure Monitor System (Tpms)
326 STARTING AND OPERATING Follow the recommended tire rotation frequency for your type of driving found in the “Maintenance Schedules” Section of this manual. More frequent rotation is permis- sible if desired. The reasons for any rapid or unusual wear should be corrected prior to rotation being per- formed.
Page 327 decrease. Tire pressure should always be set based on cold inflation tire pressure. This is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1 km) after a 3 hour period.
Page 328 328 STARTING AND OPERATING Telltale Light” will turn OFF only after the tires have been inflated to the vehicle’s recommended cold tire pressure value. CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle.
Page 329: Base System - If Equipped
• The TPMS is not a substitute for proper tire mainte- nance, and it is the driver’s responsibility to maintain correct tire pressure using an accurate tire gauge, even if under-inflation has not reached the level to trigger illumination of the “Tire Pressure Monitoring Telltale Light.”...
Page 330 330 STARTING AND OPERATING inflation pressure of each tire on your vehicle, and inflate each tire to the vehicle’s recommended cold placard pressure value. The system will automatically update and the “Tire Pressure Monitoring Telltale Light” will extinguish once the updated tire pressures have been received.
Page 331: Premium System - If Equipped
10 minutes above 15 mph (24 km/h) will turn OFF the “Tire Pressure Monitoring Telltale Light” as long as none of the road tires are below the low pressure warning threshold. NOTE: If your vehicle is not equipped with a matching full size spare wheel and tire assembly, it does not have a tire pressure monitoring sensor in the spare tire.
Page 332 332 STARTING AND OPERATING The Tire Pressure Monitor System (TPMS) consists of the following components: • Receiver Module • 4 Tire Pressure Monitoring Sensors • 3 Trigger Modules (mounted in three of the four wheel wells) • Various Tire Pressure Monitoring System Messages, which display in the Electronic Vehicle Information Center (EVIC), and a graphic displaying tire pressures •...
Page 333 Should a low tire condition occur on any of the four active road tire(s), you should stop as soon as possible, and inflate the low tire(s) that is flashing on the graphic display to the vehicle’s recommended cold tire pressure. The system will automatically update, the graphic dis- play of the pressure value(s) will stop flashing, and the “Tire Pressure Monitoring Telltale Light”...
Page 334 334 STARTING AND OPERATING NOTE: Your system can be set to display pressure units in PSI, kPa, or BAR. If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the Tire Pressure Monitoring Telltale Light will no longer flash, the CHECK TPM SYSTEM text message will not be present, and a pressure value will be displayed instead of dashes.
Page 335 matching full size spare tire is swapped with a low pressure road tire, the next ignition key cycle will still show the “Tire Pressure Monitoring Telltale Light” to be ON, a chime to sound, a Low Pressure message to appear in the EVIC, and the graphic display will still show the low tire pressure value flashing.
Page 336: General Information
336 STARTING AND OPERATING In addition, the “Tire Pressure Monitoring Telltale Light” will turn OFF and the graphic in the EVIC will display a new pressure value instead of dashes (- -), as long as no tire pressure is below the low-pressure warning limit in any of the four active road tires.
Page 337: L Engines (If Equipped)
5.7L Engines (If Equipped) The 5.7L engine is designed to meet all emissions regulations and provide satisfac- tory fuel economy and performance when using high quality unleaded gasoline hav- ing an octane range of 87 to 89. The manu- facturer recommends the use of 89 octane for optimum performance.
Page 338: Gasoline/Oxygenate Blends
338 STARTING AND OPERATING The manufacturer supports the use of reformulated gaso- line. Properly blended reformulated gasoline will pro- vide excellent performance and durability of engine and fuel system components. Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxy- genates such as 10% ethanol, MTBE, and ETBE.
Page 339: Materials Added To Fuel
It is even more important to look for gasolines without MMT in Canada, because MMT can be used at levels higher than those allowed in the United States. MMT is prohibited in Federal and California reformu- lated gasoline. Materials Added To Fuel All gasoline sold in the United States is required to contain effective detergent additives.
Page 340: Carbon Monoxide Warnings
340 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
Page 341: Ethanol Fuel (E-85)
E-85 Fuel Cap CAUTION! Only vehicles with the E-85 fuel filler cap (gas cap) can operate on E-85. STARTING AND OPERATING 341 E-85 Badge ETHANOL FUEL (E-85) E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline.
Page 342: Fuel Requirements
342 STARTING AND OPERATING WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank.
Page 343: Selection Of Engine Oil For Flexible Fuel
Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) and Gasoline Vehicles Whether operating the vehicle on an E-85 ethanol fuel or unleaded gasoline the engine oil requirements are the same. Refer to “Maintenance Procedures” in Section 7 of this manual for the proper quality and viscosity engine oil.
Page 344: Fuel Requirements (Diesel Engines)
344 STARTING AND OPERATING CAUTION! • Replacing fuel system components with non- ethanol compatible components can damage your vehicle. • Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold start- ing and may affect drivability. FUEL REQUIREMENTS (DIESEL ENGINES) Use good quality diesel fuel from a reputable supplier.
Page 345: Adding Fuel
Ultra-Low Sulfur Diesel Fuel Label WARNING! Do not use alcohol or gasoline as a fuel blending agent. They can be unstable under certain conditions and hazardous or explosive when mixed with diesel fuel. STARTING AND OPERATING 345 Diesel fuel is seldom completely free of water. To prevent fuel system trouble, drain the accumulated water from the fuel/water separator using the fuel/water separator drain provided.
Page 346: Fuel Filler Cap (Gas Cap)
346 STARTING AND OPERATING Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door, on the driver’s side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle.
Page 347 CAUTION! To avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. NOTE: When the fuel nozzle “clicks” or shuts off, the fuel tank is full. WARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled.
Page 348: Vehicle Loading
348 STARTING AND OPERATING Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a “CHECK GASCAP” message will be displayed in the EVIC (Electronic Vehicle Information Center). Refer to “Electronic Vehicle Information Center”...
Page 349 tongue weight, and cargo. The label also specifies maxi- mum capacities of front and rear axle systems (GAWR). Total load must be limited, so GVWR, and front and rear GAWR are not exceeded. Payload The payload of a vehicle is defined as the allowable load weight a truck can carry, including the weight of the driver, all passengers, options and cargo.
Page 350 350 STARTING AND OPERATING Loading The actual total weight and the weight of the front and rear of your vehicle at the ground can best be determined by weighing it when it is loaded and ready for operation. The entire vehicle should first be weighed on a commer- cial scale to insure that the GVWR has not been exceeded.
Page 351: Trailer Towing
TRAILER TOWING In this section you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer carefully re- view this information to tow your load as efficiently and safely as possible.
Page 352 352 STARTING AND OPERATING Gross Axle Weight Rating (GAWR) The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR.
Page 353 safety. The addition of a friction/hydraulic sway control also dampens sway caused by traffic and crosswinds and contributes positively to tow vehicle and trailer stability. Trailer sway control and a weight distributing (load equalizing) hitch are recommended for heavier Tongue Weights (TW) and may be required depending on Vehicle and Trailer configuration/loading to comply with gross axle weight rating (GAWR) requirements.
Page 354: Trailer Hitch Classification
354 STARTING AND OPERATING Improper Adjustment of Weight Distributing System Trailer Hitch Classification Your vehicle may be factory equipped for safe towing of trailers weighing over 3,500 lbs (1 587 kg) with the optional Trailer Tow Prep Package. See your dealer for package content.
Page 355: Trailer Towing Weights (Maximum Trailer Weight Ratings)
Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission Model 3.7L/Automatic 3.7L/Automatic 4.7L/Automatic 4.7L/Automatic 4.7L/Automatic (w/ Trailer Tow Group IV) 4.7L/Automatic (w/ Trailer Tow Group IV) 5.7L/Automatic GCWR (Gross Com- Frontal Area bined Wt.
Page 356 356 STARTING AND OPERATING 5.7L/Automatic (Over- land) 5.7L/Automatic 3.0L Diesel/Automatic 3.0L Diesel/Automatic Refer to local laws for maximum trailer towing speeds. NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the Tire and Loading Information placard.
Page 357: Trailer And Tongue Weight
Trailer and Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of vehicle and trailer.
Page 358: Towing Requirements
358 STARTING AND OPERATING NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, must be considered as part of the total load on your vehicle. Refer to the Tire and Loading Information plac- ard in the “Tire—Safety Information”...
Page 359 WARNING! Improper towing can lead to an injury accident. Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer and will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control.
Page 360 360 STARTING AND OPERATING 3. GAWR 4. Tongue weight rating for the trailer hitch utilized (This requirement may limit the ability to always achieve the 10% to 15% range of tongue weight as a percentage of total trailer weight). Towing Requirements — Tires −...
Page 361 − An electronically actuated trailer brake controller is required when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electronic brake controller is not required. − Trailer brakes are recommended for trailers over 1,000 lbs (454 kg) and required for trailers in excess of 2,000 lbs (907 kg).
Page 362: Towing Tips
362 STARTING AND OPERATING The Trailer Tow Package may include a 4 and 7 pin wiring harness. Use a factory approved trailer harness and connector. The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations.
Page 363 Towing Tips — Automatic Transmission The “D” range can be selected when towing. However, if frequent shifting occurs while in this range, the ”Tow/ Haul” mode (if equipped) or a lower gear range should be selected. NOTE: Using the ”Tow/Haul” mode (if equipped) or a lower gear range while operating the vehicle under heavy operating conditions will improve performance and extend transmission life by reducing excessive shift-...
Page 364: Recreational Towing (Behind Motorhome, Etc.)
364 STARTING AND OPERATING − Air Conditioning Turn off temporarily. − Refer to Cooling System Operating information in the Maintenance section of this manual for more informa- tion. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing – 2WD Models Recreational towing is allowed ONLY if the driveshaft is removed.
Page 365 Shifting Into Neutral (N) Use the following procedure to prepare your vehicle for recreational towing. CAUTION! It is necessary to follow these steps to be certain that the transfer case is fully in N (Neutral) before recre- ational towing to prevent damage to internal parts. 1.
Page 366 366 STARTING AND OPERATING 5. Start engine. 6. Shift transmission into D (Drive). 7. Release brake pedal and ensure that there is no vehicle movement. 8. Shut the engine off. 9. Shift transmission into P (Park). 10. Place the ignition key in the OFF position, and remove key.
Page 367 Shifting Out Of Neutral (N) Use the following procedure to prepare your vehicle for normal usage. 1. Depress brake pedal. 2. Turn the ignition key ON, engine off. 3. Shift transmission into N (Neutral). 4. Shift transfer case out of N (Neutral). Hold down N (Neutral) “pin”...
Page 368: Snow Plow
368 STARTING AND OPERATING WARNING! You or others could be injured if you leave the vehicle unattended with the transfer case in the N (Neutral) position without first fully engaging the parking brake. The transfer case N (Neutral) position disengages both the front and rear driveshafts from the powertrain and will allow the vehicle to move regardless of the transmission position.
Page 369: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flashers ....370 If Your Engine Overheats ....371 Jacking And Tire Changing .
Page 370: Hazard Warning Flashers
370 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS Your vehicle’s hazard warning flasher is an emergency warning system. When you activate it, all front and rear directional signals will flash intermittently. Use it when your vehicle is disabled on or near the road. It warns other drivers to steer clear of you and your vehicle.
Page 371: If Your Engine Overheats
IF YOUR ENGINE OVERHEATS In any of the following situations, you can reduce the potential for overheating by taking the appropriate ac- tion. • On the highways — Slow down. • In city traffic — While stopped, put transmission in N (Neutral), but do not increase engine idle speed.
Page 372: Jacking And Tire Changing
372 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack.
Page 373: Spare Tire Stowage
Spare Tire Stowage The spare tire is stowed under the rear of the vehicle by means of a cable winch mechanism. To remove or stow the spare, use the jack handle to rotate the “spare tire drive” nut. The nut is located under a plastic cover at the center-rear of the cargo floor area, just inside the liftgate opening.
Page 374: Preparations For Jacking
374 WHAT TO DO IN EMERGENCIES CAUTION! The winch mechanism is designed for use with the jack extension tube only. Use of an air wrench or other power tools is not recommended and can dam- age the winch. When the spare is clear, tilt the retainer at the end of the cable and pull it through the center of the wheel.
Page 375: Jacking Instructions
WHAT TO DO IN EMERGENCIES 375 Jacking Instructions 1. Remove the spare tire, jack, and tools from storage. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground.
Page 376 376 WHAT TO DO IN EMERGENCIES 4. Locate the jack as shown. For the front axle, place it under the front lower control arm as shown. For the rear axle, place it under the axle near the wheel to be changed. Ensure the jack is closest to the inside of the wheel when jacking on the rear axle.
Page 377 WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6. Remove the lug nuts and wheel. 7.
Page 378: Jump Starting
378 WHAT TO DO IN EMERGENCIES tire until you hear the winch “ratchet” three times. Double check to ensure the tire is snug against the underbody of the vehicle. Damage to the winch cable may result if the vehicle is driven with the tire loose. WARNING! Do not use power tools to winch the tire up or down.
Page 379 1. Remove all metal jewelry such as watch bands or bracelets which might make an unintended electrical contact. 2. Park the booster vehicle within cable reach but with- out letting the vehicles touch. Set the parking brake on both vehicles, place the transmission in P (Park), and turn the ignition OFF.
Page 380 380 WHAT TO DO IN EMERGENCIES WARNING! Any procedure other than above could result in: 1. Personal injury caused by electrolyte squirting out the battery vent; 2. Personal injury or property damage due to battery explosion; 3. Damage to charging system of booster vehicle or of immobilized vehicle.
Page 381: Emergency Tow Hooks - If Equipped
EMERGENCY TOW HOOKS — IF EQUIPPED If your vehicle is equipped with tow hooks, there will be one in the rear and two mounted on the front of the vehicle. The rear hook will be located on the driver’s side of the vehicle.
Page 382: Towing A Disabled Vehicle
382 WHAT TO DO IN EMERGENCIES TOWING A DISABLED VEHICLE 2WD Models Only Provided the transmission is operable, tow only in N (Neutral) at speeds not exceeding 30 mph (48 km/h), for distances of not more than 15 miles (24 km). Towing at more than 30 mph (48 km/h) or for more than 15 miles (24 km) can cause severe transmission damage.
Page 383: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS Engine Compartment – 3.7L ....386 Engine Compartment – 4.7L ....387 Engine Compartment –...
Page 384 384 MAINTAINING YOUR VEHICLE Maintenance-Free Battery ....401 Air Conditioner Maintenance ... . . 402 Power Steering Fluid Check .
Page 385 High Intensity Discharge Headlights (HID) — If Equipped ......435 Head Light ......436 Front Turn Signal .
Page 386: Engine Compartment - 3.7L
386 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT – 3.7L...
Page 387: Engine Compartment - 4.7L
MAINTAINING YOUR VEHICLE 387 ENGINE COMPARTMENT – 4.7L...
Page 388: Engine Compartment - 5.7L
388 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT – 5.7L...
Page 389: Engine Compartment - 3.0L Diesel
MAINTAINING YOUR VEHICLE 389 ENGINE COMPARTMENT – 3.0L DIESEL...
Page 390: Onboard Diagnostic System - Obd Ii
390 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emis- sions well within current government regulations.
Page 391: Loose Fuel Filler Cap Message
Loose Fuel Filler Cap Message After fuel is added, the vehicle diagnostic system can determine if the fuel filler cap is loose, improperly installed, or damaged. A “CHECK GASCAP” message will be displayed in the EVIC (Refer to Section 4 of this manual).
Page 392 392 MAINTAINING YOUR VEHICLE is functioning and is not on when the engine is running, and that the OBD (On Board Diagnostic) system is ready for testing. Normally, the OBD system will be ready. The OBD system may not be ready if your vehicle was recently serviced, if you recently had a dead battery, or a battery replacement.
Page 393: Replacement Parts
you may need to do nothing more than drive your vehicle as you normally would in order for your OBD system to update. A recheck with the above test routine may then indicate that the system is now ready. Regardless of whether your vehicle’s OBD system is ready or not ready, if the MIL symbol is illuminated during normal vehicle operation, you should have your vehicle serviced before going to the I/M station.
Page 394: Maintenance Procedures
394 MAINTAINING YOUR VEHICLE MAINTENANCE PROCEDURES The pages that follow contain the required maintenance services determined by the engineers who designed your vehicle. Besides the maintenance items for which there are fixed maintenance intervals, there are other items that should operate satisfactorily without periodic maintenance.
Page 395 Change Engine Oil Refer to the Maintenance Schedule for recommended engine oil change intervals. Engine Oil Selection — Gasoline Engines For best performance and maximum protection for all engines under all types of operating conditions, the manufacturer recommends engine oils that are API Cer- tified and meet the requirements of DaimlerChrysler Material Standard MS-6395.
Page 396 396 MAINTAINING YOUR VEHICLE Engine Oil Viscosity (3.7L/4.7L/5.7L Engines) SAE 5W-20 engine oil is recommended for all operating temperatures. This engine oil improves low temperature starting and vehicle fuel economy. The engine oil filler cap also shows the recommended engine oil viscosity for your vehicle. For information on engine oil filler cap location, see the “Engine Compart- ment”...
Page 397 Synthetic Engine Oils You may use synthetic engine oils provided the recom- mended oil quality requirements are met, and the recom- mended maintenance intervals for oil and filter changes are followed. Materials Added to Engine Oils The manufacturer strongly recommends against the ad- dition of any additives (other than leak detection dyes) to the engine oil.
Page 398: Drive Belts - Check Condition And Tension
398 MAINTAINING YOUR VEHICLE Drive Belts — Check Condition and Tension Belt tension is controlled by means of an automatic tensioner. No belt tension adjustments are required. However, belt and belt tensioner condition should be inspected at the specified intervals, and replaced if re- quired.
Page 399: Catalytic Converter
WARNING! The air induction system (air cleaner, hoses, etc) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner, hoses, etc) unless such removal is necessary for repair or maintenance. Make sure that no one is near the engine compartment before starting the vehicle with the air induction system (air cleaner, hoses, etc) removed.
Page 400: Crankcase Emission Control System
400 MAINTAINING YOUR VEHICLE NOTE: Intentional tampering with emissions control systems can result in civil penalties being assessed against you. WARNING! A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system.
Page 401: Maintenance-Free Battery
Check ventilation hose for indication of damage or plugging deposits. Replace if necessary. Maintenance-Free Battery Your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic main- tenance required. MAINTAINING YOUR VEHICLE 401 WARNING! •...
Page 402: Air Conditioner Maintenance
402 MAINTAINING YOUR VEHICLE CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked (+) positive and negative (-) and identified on the battery case.
Page 403: Power Steering Fluid Check
WARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to Section 3 of the Warranty Information Book for additional warranty information.
Page 404 404 MAINTAINING YOUR VEHICLE CAUTION! Do not use Automatic Transmission Fluid (ATF) or other types of power steering fluids when servicing the power steering system of this vehicle. Damage to the power steering system can result from the use of the wrong power steering fluid.
Page 405: Body Lubrication
Body Lubrication Locks and all body pivot points, including such items as seat tracks, doors, tailgate and hood hinges, should be lubricated periodically to assure quiet, easy operation and to protect against rust and wear. Prior to the appli- cation of any lubricant, the parts concerned should be wiped clean to remove dust and grit;...
Page 406: Exhaust System
406 MAINTAINING YOUR VEHICLE The fluid reservoir for the windshield washers and the rear window washer is shared. The fluid reservoir is located in the engine compartment, be sure to check the fluid level at regular intervals. Fill the reservoir with windshield washer solvent only (not radiator antifreeze).
Page 407: Cooling System
WARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can even- tually poison you. To avoid breathing CO, refer to Exhaust Gas in the Safety Tips section of this manual. Cooling System WARNING! You or others can be badly burned by hot antifreeze/...
Page 408 408 MAINTAINING YOUR VEHICLE the coolant recovery bottle. DO NOT REMOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT. Cooling System — Drain, Flush, And Refill At the intervals shown on the Maintenance Schedule, the system should be drained, flushed and refilled. If the solution is dirty and contains a considerable amount of sediment, clean and flush with reliable cooling system cleaner.
Page 409 Adding Coolant Your vehicle has been built with an improved antifreeze/ coolant that allows extended maintenance intervals. This antifreeze/coolant can be used up to 5 Years or 100,000 miles (160 000 km) before replacement. To prevent reduc- ing this extended maintenance period, it is important that you use the same antifreeze/coolant throughout the life of your vehicle.
Page 410 410 MAINTAINING YOUR VEHICLE The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. WARNING! • The warning words DO NOT OPEN HOT on the cooling system pressure cap are a safety precau- tion.
Page 411 The radiator normally remains completely full, so there is not need to remove the radiator cap unless checking for antifreeze/coolant freeze point or replacing antifreeze/ coolant. Advise your service attendant of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month.
Page 412: Hoses And Vacuum/Vapor Harnesses
412 MAINTAINING YOUR VEHICLE • Make sure that the radiator and coolant recovery bottle hoses are not kinked or obstructed. • Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean, also.
Page 413: Brake System
You are urged to use only the manufactures-specified tubes, connections and clamps, or their equivalent in material and specification, in any fuel system servicing. Brake System In order to assure brake system performance, all brake system components should be inspected periodically. Refer to the Maintenance Schedule in Section 8 for suggested service intervals.
Page 414 414 MAINTAINING YOUR VEHICLE NOTE: Inspection of brake hoses should be performed whenever the brake system is serviced and every engine oil change. Inspect hydraulic brake hoses for surface cracking, scuffing, or worn spots. If there is any evidence of cracking, scuffing, or worn spots, the hose should be replaced immediately! Eventual deterioration of the hose can take place resulting in a possibility of a burst failure.
Page 415: Front/Rear Axle Fluid
WARNING! Use of a brake fluid that may have a lower initial boiling point, or is unidentified as to specification, may result in sudden brake failure during hard prolonged braking. You could have an accident. WARNING! Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire.
Page 416: Transfer Case
416 MAINTAINING YOUR VEHICLE Selection of Lubricant Use only manufacturer’s recommended fluid, refer to Fluids, Lubricants, and Genuine Parts for correct fluid type. Transfer Case Fluid Level Check Inspect the transfer case for fluid leaks. If a fluid leak is found, the transfer case fluid level can be checked by removing the filler plug located on the back side of the transfer case.
Page 417: Automatic Transmission
Automatic Transmission Selection of Lubricant It is important that the proper lubricant is used in the transmission to assure optimum transmission perfor- mance. Use only manufacturer’s recommended transmis- sion fluid, refer to Fluids, Lubricants, and Genuine Parts for correct fluid type. It is important that the transmission fluid be maintained at the prescribed level using the recommended fluid.
Page 418 418 MAINTAINING YOUR VEHICLE Fluid Level Check (3.7L and 3.0L Diesel Engine) Regular automatic transmission fluid level checks are not required. For this reason, the dipstick is omitted. If you notice fluid loss or gear shift malfunction, have your authorized dealer check the transmission fluid level. CAUTION! •...
Page 419 Fluid Level Check (4.7L and 5.7L Engine) Check the fluid level while the transmission is at normal operating temperature. This occurs after at least 15 miles (25 km) of driving. At normal operating temperature the fluid cannot be held comfortably between the fingertips. To check the automatic transmission fluid level properly, the following procedure must be used: 1.
Page 420: Maintenance After Off-Road Driving
420 MAINTAINING YOUR VEHICLE CAUTION! Be aware that if the fluid temperature is below 50°F (10°C) it may not register on the dipstick. Do not add fluid until the temperature is elevated enough to produce an accurate reading. 7. Check for leaks. Release parking brake. To prevent dirt and water from entering the transmission after checking or replenishing fluid, make certain that the dipstick cap is properly reseated.
Page 421: Appearance Care And Protection From Corrosion
CAUTION! Under frequent heavy-duty driving conditions, change all lubricants and lubricate body compo- nents, all driveline joints and steering linkage more often than in normal service to prevent excessive wear. Appearance Care And Protection From Corrosion Protection of Body and Paint from Corrosion Vehicle body care requirements vary according to geo- graphic locations and usage.
Page 422 422 MAINTAINING YOUR VEHICLE Washing • Wash your vehicle regularly. Always wash your ve- hicle in the shade using Mopar Car Wash or a mild car wash soap, and rinse the panels completely with clear water. • If insects, tar, or other similar deposits have accumu- lated on your vehicle, use Mopar Super Kleen Bug and Tar Remover to remove.
Page 423 • If you detect any stone chips or scratches in the paint, touch them up immediately. The cost of such repairs is considered the responsibility of the owner. • If your vehicle is damaged due to an accident or similar cause which destroys the paint and protective coating have your vehicle repaired as soon as possible.
Page 424 424 MAINTAINING YOUR VEHICLE • For tough stains, apply Mopar Total Clean or a mild soap solution to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. • For grease stains, apply Mopar Cleaner to a clean, damp cloth and remove stain.
Page 425 WARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Cleaning Headlights Your vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass and therefore different lens cleaning procedures must be followed.
Page 426: Fuse Panel
426 MAINTAINING YOUR VEHICLE 2. Dry with a soft tissue. Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage will also weaken the fabric. If the belts need cleaning, use Mopar Total Clean, a mild soap solution, or lukewarm water.
Page 427 Cav- Cartridge Mini Fuse Fuse 30 Amp Audio Amp (B+) Green 15 Amp Sunroof (B+) Blue 10 Amp Htd Mirror (EBL) 20 Amp Rr Pwr Out (B+) Yellow 10 Amp Rr HVAC (R/O) (Commander Only) Spare (B+) 20 Amp Door Locks (B+) Yellow 15 Amp Steer Col Lock (B+)
Page 428 428 MAINTAINING YOUR VEHICLE Cav- Cartridge Mini Fuse Fuse 10 Amp 20 Amp Yellow 10 Amp 10 Amp 15 Amp Blue Spare (R/S) 10 Amp Cav- Description Autowipe (R/A) Cigar Ltr (R/A) Tire Pressure Trans- ducers (R/O) Steering Control Mod- ule (SCM), Diag.
Page 429: Underhood Fuses
Underhood Fuses (Power Distribution Center) Power Distribution Center Cav- Cartridge Mini Fuse Fuse 50 Amp PTC Heater 1 (Diesel Green Only) Cav- Cartridge Fuse 40 Amp Green 50 Amp Green 30 Amp Pink 50 Amp 30 Amp Pink 40 Amp Green 40 Amp Description...
Page 430 430 MAINTAINING YOUR VEHICLE Cav- Cartridge Mini Fuse Fuse 40 Amp Green 30 Amp Pink 40 Amp Green 30 Amp Pink — 50 Amp 30 Amp Pink 40 Amp Green Cav- Description HVAC Blower Rear Wiper, Ign R/O Rear Window De- froster (EBL)/Heated Mirror Rear HVAC (If...
Page 431 Cav- Cartridge Mini Fuse Fuse 20 Amp HD Washer (If Yellow Equipped) 30 Amp ABS Valves Green 20 Amp PCM Batt (Gasoline Yellow Only) — Spare — Spare 15 Amp Powertrain Control Blue Module (Diesel Only) 20 Amp Final Drive Control Yellow Module (FDCM) E-Diff...
Page 432: Underhood Fuses (Integrated Power Module)
432 MAINTAINING YOUR VEHICLE Underhood Fuses (Integrated Power Module) Integrated Power Module Cav- Cartridge Mini Fuse Fuse 10 Amp Cav- Description Lt Park Lamps Cartridge Mini Fuse Description Fuse 10 Amp Trailer-Tow Park Lamps 10 Amp Rt Park Lamps 20 Amp Front Control Module Yellow (FCM) Batt #4...
Page 433: Vehicle Storage
Cav- Cartridge Mini Fuse Fuse 20 Amp Front Control Module Yellow (FCM) Batt #1 20 Amp Lt Trailer-Tow Stop/ Yellow Turn 20 Amp Front Control Module Yellow (FCM) Batt #3 20 Amp Rt Trailer-Tow Stop/ Yellow Turn 30 Amp Final Drive Control Pink Module (FDCM) 50 Amp...
Page 434: Replacement Bulbs
434 MAINTAINING YOUR VEHICLE insure adequate system lubrication to minimize the possibility of compressor damage when the system is started again. REPLACEMENT BULBS Interior Lights Glove Box Light ......194 Grab Handle Light .
Page 435: Bulb Replacement
BULB REPLACEMENT High Intensity Discharge Headlights (HID) — If Equipped The headlights are a type of high voltage discharge tube. High voltage can remain in the circuit even with the headlight switch off and the key removed. Because of this, you should not attempt to service a headlight bulb yourself.
Page 436: Head Light
436 MAINTAINING YOUR VEHICLE Head Light 1. Open the hood. 2. Turn the low or high beam bulb 1/4 turn counter clockwise to remove from housing. 3. Disconnect the electrical connector and replace the bulb. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life.
Page 437: Front Turn Signal
Front Turn Signal 1. Open the hood. 2. Turn the turn signal bulb 1/4 turn counter clockwise to remove from housing. MAINTAINING YOUR VEHICLE 437 3. Disconnect the electrical connector and replace the bulb. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life.
Page 438: Rear Tail, Stop, Turn Signal, And Back-Up Lights
438 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. Rear Tail, Stop, Turn Signal, and Back-Up Lights 1.
Page 439: Center High Mounted Stop Light (Chmsl)
3. Squeeze the socket assembly tabs to remove it from the housing. 4. Pull the bulb to remove it from the socket. 5. Replace the bulb, reinstall the socket, and reattach the light assembly. MAINTAINING YOUR VEHICLE 439 Center High Mounted Stop Light (CHMSL) 1.
Page 440: Fluids And Capacities
440 MAINTAINING YOUR VEHICLE FLUIDS AND CAPACITIES Fuel (Approximate) 3.7/4.7/5.7L Gasoline Engines 3.0L Diesel Engine Engine Oil with Filter 3.7 Liter Engine (SAE 5W-20, API Certified) 4.7 Liter Engine (SAE 5W-20, API Certified) 5.7 Liter Engine (SAE 5W-20, API Certified) 3.0 Liter Diesel Engine (SAE 5W-30 Synthetic, API Certified Low Ash) Cooling System * 3.7 Liter Engine (Mopar Engine Coolant/Antifreeze 5 Year/100,000 Mile Formula)
Page 441: Fluids, Lubricants, And Genuine Parts
FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Engine Coolant Engine Oil (3.7L/4.7L/5.7L Engines) Engine Oil (3.0L Diesel Engine) Oil Filter (3.7/4.7/5.7L Gasoline Engines) Mopar Oil Filter (P/N 05281090) Oil Filter (3.0L Diesel Engine) Spark Plugs (3.7L Engine) Spark Plugs (4.7L Engine) Spark Plugs (5.7L Engine) Fuel Selection (3.7L and 4.7L Engines) Fluid, Lubricant, or Genuine Part...
Page 442: Chassis
442 MAINTAINING YOUR VEHICLE Component Fuel Selection (5.7L Engines) Fuel Selection (3.0L Diesel Engines) Chassis Component Automatic Transmission Transfer Case (NV140 Single Speed Only) Transfer Case (NV245 Two Speed Only) Axle Differential (Front-Rear) Brake Master Cylinder Power Steering Reservoir Fluid, Lubricant, or Genuine Part 87 Octane Acceptable - 89 Octane Recommended Use only the best quality fuel with a calculated Cetane Index of 42–46.
Page 443: Maintenance Schedules
MAINTENANCE SCHEDULES CONTENTS Emission Control System Maintenance ..444 Maintenance Schedule — Gasoline Engines ..444 Required Maintenance Intervals ... 446 Maintenance Schedules —...
Page 444: Emission Control System Maintenance
444 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliability.
Page 445 • Change your engine oil more often if you drive your vehicle off-road for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 miles (10,000 km) or 6 months, whichever comes first. Your dealer will reset the oil change indicator message after completing the scheduled oil change.
Page 446: Required Maintenance Intervals
446 MAINTENANCE SCHEDULES At Each Oil Change • Change the engine oil filter. • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle. Required Maintenance Intervals NOTE: ** Vehicles built with the 4.7L engine are equipped with sixteen spark plugs, one set is located on the top of the engine under the coils and the second set is located on the side of the engine.
Page 447 Maintenance Items Change the engine oil and engine oil filter. Rotate tires. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter, replace if neces- sary. Inspect the brake linings, replace if necessary. Inspect the front &...
Page 448 448 MAINTENANCE SCHEDULES Maintenance Items Check the PCV valve, replace if necessary. Perform the first in- spection at 60,000 miles (100 000 km) or 60 months. Inspect the transfer case fluid. Replace the top row of spark plugs (4.7L Only). ** Replace the spark plugs (3.7L/5.7L Engines).
Page 449: Maintenance Schedules - Diesel Engine
WARNING! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
Page 450 450 MAINTENANCE SCHEDULES • Off-road or desert driving. NOTE: Most vehicles are operated under the conditions listed for Schedule “B.” Second is Schedule “A”. It is for vehicles that are not operated under any of the conditions listed under Sched- ule “B.”...
Page 451 • Check all lights and all other electrical items for correct operation. At Each Oil Change • Change the engine oil filter. • Inspect the exhaust system. • Inspect brake hoses. MAINTENANCE SCHEDULES 451 • Check the engine coolant/anti-freeze level, hoses, and clamps.
Page 452: Schedule "B" - Diesel Engine
452 SCHEDULE “B” — DIESEL ENGINE Schedule “B” — Diesel Engine Follow schedule “B” if you usually operate your vehicle under one or more of the following conditions. • Day or night temperatures are below 32°F (0°C). • Stop and go driving. •...
Page 453 Miles (Kilometers) Change the engine oil and engine oil filter. Rotate the tires. Check spare tire for proper pressure and correct stowage. Inspect the engine air filter element. Replace as necessary. Replace the engine air filter element. Replace the fuel filter/water separator unit. Inspect the brake linings.
Page 454 454 SCHEDULE “B” — DIESEL ENGINE Miles (Kilometers) Change the engine oil and engine oil filter. Rotate the tires. Check spare tire for proper pressure and correct stowage. Inspect the engine air filter element. Replace as necessary. Replace the engine air filter element. Replace the fuel filter/water separator unit.
Page 455 Miles (Kilometers) Change the engine oil and engine oil filter. Rotate the tires. Check spare tire for proper pressure and cor- rect stowage. Inspect the engine air filter element. Re- place as necessary. Replace the engine air filter element. Replace the engine accessory drive belt. Replace the fuel filter/water separator unit.
Page 456 456 SCHEDULE “B” — DIESEL ENGINE Applies only if vehicle is used for frequent trailer towing, or fleet/commercial service. † The replacement of such component is requested when there is superficial wear, bearing clearance, or evident grease leak. Inspection and service should be performed anytime a malfunction is observed or suspected.
Page 457: Schedule "A" - Diesel Engine
Schedule “A” — Diesel Engine Miles (Kilometers) Change the engine oil and engine oil filter. Rotate the tires. Check spare tire for proper pressure and correct stowage. Inspect the engine air filter element. Replace as neces- sary. Replace the engine air filter element. Replace the fuel filter/water separator unit.
Page 458 458 SCHEDULE “A” — DIESEL ENGINE Miles (Kilometers) Change the engine oil and engine oil filter. Rotate the tires. Check spare tire for proper pressure and correct stowage. Inspect the engine air filter element. Replace as neces- sary. Replace the engine air filter element. Replace the fuel filter/water separator unit.
Page 459: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Vehicle ......460 Prepare For The Appointment .
Page 460: Suggestions For Obtaining Service For Your Vehicle
We want you to be happy with our products and services. Warranty service must be done by an authorized Chrysler, Dodge, or Jeep dealer. We strongly recommend that you take your vehicle to your selling dealer. They know you and your vehicle best, and are most concerned that you get prompt and high quality service.
Page 461 technicians, special tools, and the latest information to assure your vehicle is fixed correctly and in a timely manner. This is why you should always talk to your dealer’s service manager first. Most matters can be resolved with this process. •...
Page 462 462 IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) To assist customers who have hearing difficulties, the manufacturer has installed special TDD (Telecommuni- cation Devices for the Deaf) equipment at its Customer Center. Any hearing or speech impaired customer who has access to a TDD or a conventional teletypewriter (TTY) in the United States can communicate with the manufacturer by dialing 1–800–380–CHRY.
Page 463: Warranty Information (U.s. Vehicles Only)
WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain prod- ucts of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Page 464: In Canada
464 IF YOU NEED CONSUMER ASSISTANCE To contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153), or go to http://www.safercar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Wash- ington, DC 20590. You can also obtain other information about motor vehicle...
Page 465 • Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix problems on computer- controlled vehicle systems and features. They show exactly how to find and correct problems the first time, using step-by-step troubleshooting and driveability procedures, proven diagnostic tests and a complete list of all tools and equipment.
Page 466: Department Of Transportation Uniform Tire Quality Grades
466 IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the National highway Traffic Safety Adminis- tration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your car.
Page 467: Temperature Grades
Temperature Grades The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
Page 469 INDEX...
Page 470 470 INDEX ABS (Anti-Lock Brake System) ... . 189,305 Adding Fuel ......345 Adding Washer Fluid .
Page 471 Fluid Type ......417 Special Additives ..... . 417 Torque Converter .
Page 472 472 INDEX Cargo Area Features ..... . 172 Cargo Compartment ..... . 172 Light .
Page 473 Drain, Flush, and Refill ....408 Inspection ......407 Points to Remember .
Page 474 474 INDEX E-85 Fuel ......340 Electric Remote Mirrors ....79 Electrical Outlet, Auxiliary (Power Outlet) .
Page 475 Oil Selection ..... . . 395,440 Oil Synthetic ......397 Overheating .
Page 476 476 INDEX Fluids, Lubricants and Genuine Parts ..441 Fog Light Service ......437 Fog Lights .
Page 477 General Information ....20,26,108,336 Glass Cleaning ......425 Glow Plug Light .
Page 478 478 INDEX Infant Restraint ......58,59 Inflation Pressure Tires ....319 Information Center, Vehicle .
Page 479 Airbag ......55,189 Alarm ....... 70 Anti-Lock .
Page 480 480 INDEX Rear Tail ......438 Seat Belt Reminder ..... 194 Security Alarm (Theft Alarm) .
Page 481 Memory Seat ......118 Memory Seats and Radio ....118 Mini-Trip Computer .
Page 482 482 INDEX Identification Logo ..... 395 Materials Added to ..... 397 Pressure Warning Light .
Page 483 Seats ......110,111 Steering ......308,403 Sunroof .
Page 484 484 INDEX Reminder, Lights On ..... 127 Reminder, Seat Belt ..... . . 43 Remote Keyless Entry (RKE) .
Page 485 Seats ....... . . 108 Adjustment ......108 Cleaning .
Page 486 486 INDEX Oil ....... . 395 Speed Control (Cruise Control) ....135 Speedometer .
Page 487 Tip Start ......280 Tire and Loading Information Placard ..314 Tire Identification Number (TIN) .
Page 488 488 INDEX Traction Control Light ....190 Trailer Sway Control (TSC) ....146 Trailer Towing .
Page 489 Variance, Compass ..... . . 205 Vehicle Identification Number (VIN) ... . 8 Vehicle Loading .
Page 490 INTRODUCTION INTRODUCTION ROLLOVER WARNING HOW TO USE THIS MANUAL WARNINGS AND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS/ALTERATIONS THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Wireless Ignition Node (WIN)Fob with Integrated Key (FOBIK)Ignition Key RemovalKey-In-Ignition ReminderSENTRY KEY Replacement KeysCustomer Key (Fob) ProgrammingGeneral InformationSECURITY ALARM SYSTEM - IF EQUIPPED To Set the AlarmTo Disarm the SystemILLUMINATED ENTRY REMOTE KEYLESS ENTRY To Unlock the DoorsTo Lock the DoorsTo Release the Liftgate Flipper GlassUsing The Panic AlarmProgramming Additional TransmittersTransmitter Battery ServiceGeneral Information REMOTE STARTING SYSTEM - IF EQUIPPED DOOR LOCKS Manual Door LocksPower Door LocksChild Protection Door LockWINDOWS Power WindowsWind BuffetingLIFTGATE Liftgate Flipper GlassOCCUPANT RESTRAINTS Lap/Shoulder BeltsLap/Shoulder Belt Operating InstructionsAdjustable Upper Shoulder Belt AnchorageAutomatic Locking Mode - If EquippedEnergy Management FeatureSeat Belt PretensionersEnhanced Seat Belt Use Reminder System (BeltAlert)Seat Belts and Pregnant WomenSeat Belt ExtenderDriver And...

This manual is also suitable for:

2008 cherokee

Jeep 2008 Grand Cherokee Owner's Manual

Introduction 1

Things to Know before Starting Your Vehicle

Things to Know before Starting Your Vehicle

68 Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding the Features of Your Vehicle

166 Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

INTRODUCTION

Chapters

Related Manuals for Jeep 2008 Grand Cherokee

Summary of Contents for Jeep 2008 Grand Cherokee