Table of Contents
Advertisement
MASTER BAY VISTONICS™ ENCODERS & KEYS
The third way of controlling, and changing the parameters of the 24 output busses described earlier is as
follows.
The VST encoders control the levels of the displayed output busses. To select the desired range of busses
the user must press [Page A] or [Page B] just to the right of the screen. The [PAGE A] key displays busses
1-16 in the upper area, [PAGE B] displays busses 17-32.
To change output bus parameters the user must first ensure that the [SOLO SEL] key on the VISTONICS
SWITCH FUNCTION panel is active (see above).
When this is done pressing the {SOLO} VST key opens the processing Area in the upper left quadrant of
the screen. In order to change the parameters for EQ, Dynamics or Pan, the appropriate area on the touch-
screen must be pressed.
VST Key Function
The functionality of the VST solo buttons can be set, via the three touch buttons on the far right of the
screen, to TB Assign, ON/OFF or SOLO/SEL, where SOLO/SEL is the default setting. The function is the
same for ALL Encoders in both pages. The [PAGE A] key displays busses 1-16 in the VST area, [PAGE B]
displays busses 17-32.
Page 5 - 7
Soundcraft Vi1™ User Guide Issue 0810
Advertisement
Table of Contents
