Solo Operation Logic - SoundCraft Vi1 User Manual

Solo Operation Logic

Activating Solos
A Solo is activated when any Solo/Sel switch on the console is pressed, as long as the following is true:
* Gang Mode is not active
* VCA or Mute Group Setup Config page is not open
Clearing Solos
* All active Solos can be cleared by pressing the momentary Solo Clear switch in the Master
Section of the console. This switch illuminates when any Solos are active.
* Solos can be switched off manually.
* Solos can be cleared by pressing other Solos, under the rules of the Autocancel system (see
later in this chapter).
Soundcraft Vi1™ User Guide Issue 0810 Page 11 - 11