Follow Output Solo Mode - SoundCraft Vi1 User Manual

Follow Output Solo Mode

Purpose Of The Follow Output Solo Mode
The Follow Output Solo [FLW] keys allow the user to quickly identify and adjust those input channels which
are making contributions to each of the 32 outputs.
There are two [FLW] keys: there is one fader key and one Vistonics™ area key. Only one key can be active
at any one time (none can be selected also).
* If Follow Solo is NOT active for faders or Vistonics™ encoders, pressing a Group or Aux Output
Solo will activate an Output Solo, and it will also display the EQ/Dyn/Misc touch screen area for
the Soloed Output, on the upper-left quadrant of the screen (in the space normally occupied by
the clock/menu display).
* If Follow Solo IS active for either faders or Vistonics encoders, pressing a Group or Aux Output
Solo/Sel will work as described above, and will also switch the input channel faders or encoders
to be assigned to the Soloed bus's contributing sends (equivalent to 'Fader Flip' on some other
consoles).
* If a Matrix Output Solo/Sel is pressed, regardless of the setting of Follow Solo modes, the
Output Solo will be activated, the EQ/Dyn/Misc touch screen for the Matrix Output displayed,
and the channel faders will be assigned to the contribution levels from the Outputs to the Soloed
Matrix Output.
Note: the lower [FLW] key has an additional function in allowing VCAs to control the Aux sends
of input channels. See chapter 9 for details.
Page 11 - 14 Soundcraft Vi1™ User Guide Issue 0810