CHANNEL VISTONICS ENCODERS
Channel encoders always control a parameter on their own channel strip. The function of the channel
encoders can be globally selected via the [INPUT GAIN], [GATE THRS] and [PAN] keys on the Encoder
Mode panel.
Page 7 - 2
[USER1] and [USER2] are currently used to set the
channel encoders to control the AUX 1 and the AUX 2
levels respectively.
HINT: If [ALL BUSSES] is active or a MATRIX output is
soloed, the channel encoders are disabled and have no
function (the previous function is remembered however).
Soundcraft Vi1™ User Guide Issue 0810