Adjusting A Matrix Send Level; Matrix Configuration; Source Field - SoundCraft Vi1 User Manual

Adjusting A Matrix Send Level

Ensure that the [BUSSES 1-16] or [BUSSES 17-24] keys are NOT selected.
Press the [SOLO/SEL] on a matrix master. All the input bays will change to the matrix contributions view
and the Faderglow™ illuminates with the matrix colour (CYAN). The input strip [ON] keys act as ON for the
matrix contribution signals. The fader adjusts the contribution level of the desired source (1..16).

MATRIX CONFIGURATION

This screen opens on the Widescreen Vistonics after pressing SOLO/SEL on a matrix master.

SOURCE field

Displays the patched source.
The on-screen button opens the Matrix patch configuration page.
The source for the selected matrix contribution can be chosen from Bus masters, channel
direct outputs, or from actual input sources on the Local I/O, MADI card, or Stagebox. For
each source it is possible to choose a variety of 'poitns' within the signal path - see next
page.
Page 6 - 2 Soundcraft Vi1™ User Guide Issue 0810