Last; Next; The Arrow Keys And Recall - SoundCraft Vi1 User Manual

LAST

The [LAST] key is used in conjunction with the information displayed in the Cue List. Pressing [LAST]
causes any settings pointed to by the previous Cue, in the Cue List, to be loaded into the desk, i.e. the
desk is configured according to the settings held against the previous Cue. This Cue becomes the current
one in the list.

NEXT

The [NEXT] key is used in conjunction with the information displayed in the Cue List. Pressing [NEXT]
causes any settings pointed to by the next Cue, in the Cue List, to be loaded into the desk, i.e. the desk is
configured according to the settings held against the next Cue. This Cue becomes the current one in the
list.
The NEXT and LAST keys are duplicated near the front of the desk, above the SOLO CLR and GANG keys.
For safety, these duplicated keys are normally disabled, and have to be switched on via the MENU/
SETTINGS page. Once the keys have been enabled this will be stored when the Show is saved.

The Arrow Keys and RECALL

The [up arrow] and [down arrow] keys are used in conjunction with the information displayed in the Cue
List. Pressing either of these keys will scroll up or down the list, without implementing the settings of any of
the Cues which are being scrolled through.
When the required Cue is reached, the user presses [RECALL]: this causes any settings pointed to by the
selected Cue to be loaded into the desk, i.e. the desk is configured according to the settings held against
this Cue. This Cue becomes the current one in the list and the cue name is displayed in green text to
indicate this.
Soundcraft Vi1™ User Guide Issue 0810 Page 15 - 3