Mntr A Section - SoundCraft Vi1 User Manual

MNTR A Section

Source
USER A, USER B and (LCR,C) are mutually exclusive, but LCR and C can be mixed. Also none can be
selected.
<LCR>
Sets the monitor A Source to LCR.
<C>
Sets the Monitor A Source to C.
<USER A>
Sets the Monitor A Source to USER A. This could, for example, be used for a 2-track return.
<USER B>
Sets the monitor A Source to USER B. This could, for example, be used for a 2-track return.
Solo Switching
<IN SOLO>
Routes the Input SOLO Signals to the Monitor A Output.
<OUT SOLO>
Routes the Output SOLO from the Busses that are included in the OUT SOLO selection to the Monitor A
Output.
<TB RET>
Routes the Talkback Return Signal to the Monitor A output.
Format field
The encoder selects one of the following options to be the listening format (the icons are shown to the left
of the list):
LR
RL
LL
RR
Mono
Soundcraft Vi1™ User Guide Issue 0810
left source to left monitor, right source to right monitor
left source to right monitor, right source to left monitor
left source to left and right monitor
right source to left and right monitor
left and right source is summed and fed to left and right monitor.
The Centre signal is not affected.
Page 11 - 5