Mute Set-Up & Mute Master Keys; Setting Mute Groups - SoundCraft Si Compact User Manual

MUTE SET-UP & MUTE MASTER KEYS
1
2
NOTE: During MUTE SETUP the ON/OFF (MUTE) state of any channels is not affected.
When not in MUTE SETUP mode the keys 1-4 act as the MUTE MASTERS, pressing any of
the keys will MUTE (turn off) any channels within the mute group.
NOTE: A channel may be a member of more than one mute group, in this situation the MUTE
Masters operate in a logical 'OR' manner.
Soundcraft Si Compact User Guide 1211
1. MUTE SETUP key: pressing this key to toggle in/out of Mute Group
Setup mode; the SETUP key has no function on its own and requires
the selection of one of the MUTE MASTERS (1-4) to indicate which of
the four mute groups you are going to SETUP .
2. MUTE MASTERS 1-4: when used while MUTE SETUP is active the keys
allow setting of the Mute Groups to the channels, when not in MUTE
SETUP the keys act as the Mute Group Masters.

SETTING MUTE GROUPS:

1. Press the SETUP key then one of the MUTE keys (1-4); SELect keys will
light if any of the channels or buses on the surface is assigned (a slave)
to the selected mute group.
2. Add or remove slaves by pressing the SELect keys on the channel(s)
you wish to include in the mute group.
3. Additional mute groups may be set at the same time by changing to a
different MUTE MASTER.
4. To exit the setup process press the SETUP key.
25