INPUT
INPUT field
Select source IN1 or IN2. If OSC is active the central oscillator is patched to this channel and the selector
is disabled.
Pressing the {IN1 PATCH} or {IN2 PATCH} VST config key opens the Input Patch Configuration page.
GAIN field
{encoder} adjusts the analogue input gain in the range from +5 dB to +65 dB. {PAD} reduces the input
sensitivity by 20 dB.
Note: If a Vi6 type Stagebox is attached, the gain range will be +15dB to +60dB and will have a
20dB PAD switch.
TRIM field
Encoder adjusts the digital Input Gain in the range +18/-36 dB
{LO CUT} inserts the pre AD converter analogue low cut filter (Vi6 Stagebox inputs only).
LO CUT field
Encoder adjusts the Low cut frequency in the range 20 to 600 Hz.
{IN} switches the Low Cut filter in and out.
Page 4 - 4
Soundcraft Vi1™ User Guide 0810