Table of Contents
Advertisement
Press <Exit> to return to the page similar to that below. Notice that an FX processor icon appears in
the FX area of the screen when an FX Processor is allocated to the AUX bus in question.
Press {LR} to route the FX signal to the Main Master bus.
Select the Insert {POINT} to be pre processing in order to use the EQ and Dynamics on the output of
the FX.
Pressing the <PAN> area will return the screen to its normal display mode.
The FX processor can be adjusted by pressing the FX processor icon on the screen. The parameters
available for adjustment will depend upon the type of FX which is selected. A description of the Effects and
their associated controls is given in the section which starts on page 11 of this chapter.
Soundcraft Vi1™ User Guide Issue 0810
Page 20 - 7
Advertisement
Table of Contents
