All Busses - SoundCraft Vi1 User Manual

ALL Busses

If [BUSSES 1-16] or [BUSSES 17-24] is selected in the Input Fader Page selection, all 24 Busses can be
assigned to the Input Fader section on two layers. These layers allow a quick way to compare the outputs
or quickly change the processing of the Busses.
HINT: Configuration of the BUSSES, e.g. Format (mono/stereo) and Type (Aux, Grp, Matrix) is also handled
in these Layers. In fact, this is the only method of accessing the format and type.
Soundcraft Vi1™ User Guide Issue 0610 Page 8 - 5