Tb Return Section - SoundCraft Vi1 User Manual

Preset 1 – 3 Fields
Their {VST config buttons} opens the configuration page to setup the preset patches to the Busses.

TB Return Section

This section allows the console operator to route inputs directly into the monitor circuit. This allows assist-
ants within a venue to talk directly to the console operator. This function must be enabled via the monitor
setup page (page 11-5).
Gain
Encoder adjusts the TB return signal level. {ON} enables the TB return.
Return TB
Its {VST config button} opens the patch configuration page to choose the physical connector that will be
used for the TB return signal.
Hint! : Choose a Stagebox mic input as the Return TB source, in order to provide communication
from remote engineers.
Soundcraft Vi1™ User Guide Issue 0810 Page 12 - 5