The Console Rear Connectors; Mains Power Supply Inlet - SoundCraft Vi1 User Manual

THE CONSOLE REAR CONNECTORS

(refer to picture on next page)

Mains Power Supply Inlet

The mains input is via an IEC connector, with an associated switch, as shown below. This feeds power to
the primary PSU. A redundant primary supply is also fitted as standard. Its inlet connector is as shown
below.
Audio And Data Connectors
Mic/Line Input XLR
These 32 XLR connectors are the primray audio inputs to the console.
AES/EBU input XLRs
There are 2 pairs (4 channels) of AES/EBU input on 2 XLRs.
S/PDIF Input
There is one RCA Phono socket for S/PDIF input (2 channels)
Line Output XLRs
There are 24 bus output XLRs (Group/Aux/Matrix), 3 Master output XLRs (L, R, C) and 2 sets of 3 connec-
tors for the Monitor A (L, R, C) and Monitor B (L, R) outputs.
AES/EBU output XLRs
There are 2 pairs (4 channels) of AES/EBU output on 2 XLRs.
S/PDIF Output
There is one RCA Phono socket for S/PDIF input (2 channels)
MIDI Connectors
These are provided by the usual 5-pin DIN connectors for MIDI IN and MIDI OUT.
USB Connectors
There are 2 USB connectors for connecting external keyboards, mice or external storage devices.
HiQNet™ Connector
This is an XLR-housed EtherCon connector.
Soundcraft Vi1™ User Guide Issue 0810 Page 2 - 3