Table of Contents
Advertisement
The <MOVE> button is renamed <DROP> after it is switched on, and pressing <DROP> will 'drop' the
Cue or group of Cues at the point immediately after the last visible Cue above the selection bar. The Cue
Numbers of these moved Cues will be recalculated according to the 'Inserted Cue' numbering rules (see
Cue Numbering).
c) Selection mode buttons
<SELECT> button.
The SELECT button allows single or any number of adjacent or non-adjacent Cues to be selected for
Delete, Duplicate or Move operations. It is equivalent to CTL+Click on a PC running Windows.
Touching SELECT will change the background colour of the central Current Cue selection bar from black to
pale yellow. The Cue can be deselected by pressing Select again.
If the list is scrolled to another Cue after one has been selected, the yellow background will be retained on
that previously selected Cue. A new Cue can now be chosen in the central bar and Select pressed again to
add this one.
To deselect selected Cues, each one must either be brought into the Current Cue selection bar one at a
time and the SELECT button pressed to deselect, or a 'select all' followed by 'select none' operation can be
carried out –see Select All below.
<MULTI SELECT> button: dabbing the <MULTI SELECT> button selects the currently highlighted Cue with
a latching mode, as with Select described above, but in this case the scroll control or arrow keys can be
used to scroll through the list, and a continuous range of cues will then be selected.
When the required number of Cues has been selected, the Multiselect button is switched OFF, and the
selection range stays in operation – the range can be seen by all visible selected Cues having a pale
yellow colour.
Another range of Cues, not necessarily adjacent to the first, can be selected by repeating the above
procedure in a different part of the Cue list. The 'Selected items' field (see later) keeps track of the number
of selected Cues and is useful when some of the selections are outside the visible window.
Deselecting a range of Cues in Multiselect mode
If any of the Cues in an existing selected range is positioned in the Current Cue selection bar, then
Multiselect is switched ON, the whole existing range selection is cancelled, ready to select a new range.
In order to go back and deselect individual Cues, the <SELECT> button must be used, as described above.
<SELECT ALL> button: Selects ALL the Cues in the List. When all Cues are selected, the button changes to
a <SELECT NONE> button, which when pressed, deselects all Cues.
Pressing this button twice can therefore be used as a shortcut to clearing any existing selections in the
Cue List.
Cues Selected field: A number is displayed next to the Select button, indicating how many of the Cues are
currently selected.
Soundcraft Vi1™ User Guide Issue 0810
Page 15 - 7
Advertisement
Table of Contents
