Table of Contents
Advertisement
8
Output
Signal Flow
SIGNAL FLOW
The picture shows the signal flow in an LRC Master or an MIX Master
Figure 5-1: The Signal Flow In An LRC Master Or A MIX Master.
Only one of the three possible insert points can be used per master at any time.
Only one of the 32 MIX BUS and three masters is shown in the drawing.
• PP Insert Point*
• Equaliser
• Dynamic
• PF Insert Point*
• Fader
• ON
• AF Insert Point*
• Hi-Pass
• Delay
• Insert Send
* Only one of the three insert points can be used per master at any time.
Soundcraft Vi1™ User Guide Issue 0810
pre processing insert point
4 band parametric Equaliser
Compressor/Limiter
Pre-fader Insert Point
master fader
master on/off
After-fader Insert Point
variable frequency high-pass filter
long delay 1 mS - 5 Sec.
with Trim
51
OUTPUTS
Page 5 - 1
Advertisement
Table of Contents
